FreshFlight Original Logo

How to Use Cruise Control on Your Mitsubishi Outlander 2024

Avatar

How to Use Cruise Control on a Mitsubishi Outlander

Cruise control is a convenient feature that can help you maintain a steady speed on long road trips. It can also be helpful in stop-and-go traffic, as it can take the stress out of keeping your foot on the gas pedal.

This article will show you how to use the cruise control on a Mitsubishi Outlander. We’ll cover the basics of how to set and adjust the cruise control, as well as how to turn it off. We’ll also provide some tips on how to use cruise control safely.

So if you’re new to cruise control or just want to learn more about how to use it, read on!

How to Use Cruise Control on a Mitsubishi Outlander 2024

Cruise control is a great way to maintain a steady speed on long road trips or in heavy traffic. It can also help you save gas by keeping your foot off the gas pedal.

To enable cruise control on your Mitsubishi Outlander 2024, follow these steps:

1. Press the cruise control button on the steering wheel. This button is typically located on the left side of the steering wheel, near the horn. 2. Set your desired speed using the cruise control stalk. The cruise control stalk is located on the right side of the steering wheel. To increase your speed, push the stalk up. To decrease your speed, push the stalk down. 3. Press the set button on the cruise control stalk to confirm your speed. The set button is located in the center of the cruise control stalk.

Once you have enabled cruise control, your Outlander will automatically maintain your desired speed. You can cancel cruise control by pressing the brake pedal or the cruise control button on the steering wheel.

Adjusting Cruise Control

You can adjust your cruise control speed at any time by following these steps:

1. Press the + button on the cruise control stalk to increase your speed. 2. Press the – button on the cruise control stalk to decrease your speed. 3. Press the set button on the cruise control stalk to confirm your new speed.

Resume Cruise Control

If you need to brake while using cruise control, you can resume your original speed by following these steps:

1. Press the brake pedal to slow down your Outlander. 2. Release the brake pedal once you have reached your desired speed. 3. Press the set button on the cruise control stalk to resume your original speed.

Disabling Cruise Control

To disable cruise control, follow these steps:

1. Press the brake pedal to slow down your Outlander. 2. Press the cruise control button on the steering wheel to turn off cruise control.

Cruise Control Tips

Here are a few tips for using cruise control safely and effectively:

  • Use cruise control on long, straight roads where there is little traffic.
  • Avoid using cruise control in heavy traffic or on winding roads.
  • Be aware of your surroundings and be prepared to take over if necessary.
  • Use cruise control to help you maintain a steady speed, but do not rely on it to avoid accidents.

Cruise control can be a great way to make your long road trips more enjoyable. By following these tips, you can use cruise control safely and effectively.

Cruise control is a convenient feature that can help you save gas and reduce stress on long road trips. By following these tips, you can use cruise control safely and effectively.

Enabling Cruise Control

To enable cruise control on the Mitsubishi Outlander 2024, follow these steps:

1. Press the cruise control stalk on the steering wheel. 2. Set the desired speed by pressing the up or down arrows on the stalk. 3. The cruise control indicator light will illuminate on the dashboard, indicating that cruise control is engaged.

You can also enable cruise control by pressing the set button on the cruise control stalk. This will set the current speed as the cruise control speed.

Adjusting Cruise Control Speed

You can adjust the cruise control speed at any time by pressing the up or down arrows on the cruise control stalk. The cruise control indicator light will blink to indicate that the speed is being adjusted.

To disable cruise control, press the cancel button on the steering wheel. The cruise control indicator light will turn off, indicating that cruise control is disengaged.

You can also disable cruise control by pressing the set button on the cruise control stalk. This will cancel the current cruise control setting.

Other Cruise Control Features

The Mitsubishi Outlander 2024 has a number of other cruise control features, including:

  • A speed limiter that prevents you from exceeding a set speed.
  • A hill start assist feature that prevents the car from rolling back when you start from a stop on a hill.
  • A lane departure warning system that alerts you if you drift out of your lane.

These features can help you to drive more safely and comfortably.

Cruise control can be a helpful feature for long road trips or when you need to maintain a steady speed in traffic. By following these steps, you can safely and easily use cruise control on your Mitsubishi Outlander 2024.

How do I turn on cruise control on my Mitsubishi Outlander 2024?

1. Press the cruise control button on the steering wheel. 2. Set your desired speed by pressing the + or – buttons on the steering wheel. 3. To resume cruise control after braking, press the resume button on the steering wheel. 4. To cancel cruise control, press the cancel button on the steering wheel.

How do I adjust the cruise control speed on my Mitsubishi Outlander 2024?

1. Press the + or – buttons on the steering wheel to increase or decrease your desired speed. 2. The cruise control speed will be displayed on the instrument cluster.

How do I turn off cruise control on my Mitsubishi Outlander 2024?

1. Press the cancel button on the steering wheel. 2. The cruise control indicator light will turn off.

What happens if I brake while using cruise control on my Mitsubishi Outlander 2024?

If you brake while using cruise control, the cruise control will be disengaged. To resume cruise control, press the resume button on the steering wheel.

What happens if I accelerate while using cruise control on my Mitsubishi Outlander 2024?

If you accelerate while using cruise control, the cruise control will adjust your speed to match your acceleration. To return to your set speed, press the resume button on the steering wheel.

What are the benefits of using cruise control on my Mitsubishi Outlander 2024?

Cruise control can help you to:

  • Maintain a consistent speed, which can help to reduce fuel consumption.
  • Reduce driver fatigue, especially on long journeys.

Here are some key takeaways:

  • Cruise control can help you maintain a steady speed on long road trips, which can reduce driver fatigue.
  • Cruise control can also help you save gas by keeping your speed constant.
  • To use cruise control, press the cruise control button on the steering wheel.
  • You can set the desired speed by pressing the + or – buttons on the steering wheel.
  • To turn off cruise control, press the cancel button on the steering wheel.
  • You can also use the resume function to restart cruise control after you have slowed down for a traffic jam or other obstacle.

We hope that you have found this information helpful. If you have any other questions about using cruise control on your Mitsubishi Outlander 2024, please consult your owner’s manual.

Author Profile

Dale Richard

Latest entries

  • January 19, 2024 Hiking How to Lace Hiking Boots for a Perfect Fit
  • January 19, 2024 Camping How to Dispose of Camping Propane Tanks the Right Way
  • January 19, 2024 Traveling Information Is Buffalo Still Under Travel Ban? (Updated for 2023)
  • January 19, 2024 Cruise/Cruising Which Carnival Cruise Is Best for Families?

AutoHow.info

Mastering Cruise Control: A Step-By-Step Guide For Mitsubishi Outlander

cruise control en mitsubishi

Cruise control is a convenient feature that allows drivers to maintain a steady speed without having to constantly press the accelerator pedal. It is a popular feature in many modern vehicles, including the Mitsubishi Outlander. In this blog post, we will explore the ins and outs of cruise control in the Mitsubishi Outlander and provide a comprehensive guide on how to use it effectively.

The purpose of this blog post is to help Outlander owners understand the benefits of cruise control and how to activate and adjust it to suit their driving needs. By mastering cruise control, drivers can experience a more relaxed and efficient driving experience.

So, let’s dive in and explore the world of cruise control in the Mitsubishi Outlander!

Table of Contents

Understanding Cruise Control

Cruise control is a feature that is commonly found in modern vehicles, including the Mitsubishi Outlander. It is designed to make long drives more comfortable and convenient by allowing the driver to maintain a constant speed without having to constantly press the accelerator pedal. In this section, we will delve deeper into the concept of cruise control and its benefits, as well as how it works in general and specifically in the Mitsubishi Outlander.

Define cruise control and its benefits

Cruise control is an automated system that enables drivers to set a desired speed for their vehicle, which the car will then maintain without the need for continuous manual acceleration. This feature offers several benefits, including:

Reduced fatigue : By relieving the driver from the task of constantly adjusting the speed, cruise control helps to reduce fatigue during long journeys. This allows the driver to stay more alert and focused on the road.

Improved fuel efficiency : Maintaining a consistent speed can lead to better fuel efficiency, as it eliminates unnecessary acceleration and deceleration. This can result in cost savings over time, especially during highway driving.

Enhanced comfort : With cruise control engaged, drivers can relax their legs and feet, reducing the strain on their muscles during extended periods of driving. This can contribute to a more comfortable and enjoyable driving experience.

Explain how cruise control works in general

Cruise control operates by utilizing a combination of sensors, electronic controls, and the vehicle’s throttle system. When the driver activates cruise control, the system takes over the throttle control and maintains the desired speed set by the driver. Here’s a simplified breakdown of how it works:

Speed detection : The cruise control system uses sensors to detect the current speed of the vehicle. This information is then relayed to the control module.

Throttle control : The control module adjusts the throttle position to maintain the desired speed. It does this by either increasing or decreasing the amount of fuel being delivered to the engine.

Speed monitoring : The system continuously monitors the vehicle’s speed and makes adjustments as necessary to keep it within a close range of the set speed.

Highlight the advantages of using cruise control in the Mitsubishi Outlander

The Mitsubishi Outlander is equipped with cruise control functionality that offers several advantages to its drivers. These include:

Ease of use : The cruise control buttons in the Mitsubishi Outlander are conveniently located on the steering wheel, allowing for easy access and control without the need to take your hands off the wheel.

Smooth acceleration : The Outlander’s cruise control system provides smooth and gradual acceleration, ensuring a comfortable driving experience for both the driver and passengers.

Adaptive cruise control : Some models of the Mitsubishi Outlander come with adaptive cruise control, which uses radar or camera sensors to automatically adjust the vehicle’s speed based on the distance to the vehicle ahead. This feature adds an extra layer of convenience and safety to the cruise control experience.

In conclusion, understanding cruise control is essential for maximizing its benefits and utilizing it effectively in the Mitsubishi Outlander. By defining cruise control, explaining how it works, and highlighting the advantages specific to the Outlander, drivers can make the most of this feature and enjoy a more comfortable and efficient driving experience.

Activating Cruise Control in Mitsubishi Outlander

Activating cruise control in your Mitsubishi Outlander is a simple process that can enhance your driving experience. Cruise control allows you to maintain a steady speed without having to constantly press the accelerator pedal. This feature is especially useful during long drives or when driving on highways. Here are the steps to activate cruise control in your Mitsubishi Outlander:

Step 1: Locate the cruise control buttons

To activate cruise control, you first need to locate the cruise control buttons in your Mitsubishi Outlander. These buttons are usually located on the steering wheel for easy access and convenience. Look for buttons with labels such as “Cruise,” “Set,” or “On/Off.” Familiarize yourself with the location of these buttons before you start driving.

Step 2: Turn on the cruise control system

Once you have located the cruise control buttons, the next step is to turn on the cruise control system. To do this, make sure your vehicle is in motion and at a speed of at least 25 mph. Press the “On/Off” or “Cruise” button to activate the cruise control system. You should see a light or indicator on your dashboard confirming that the system is now active.

Step 3: Set the desired speed

After activating the cruise control system, it’s time to set your desired speed. To do this, accelerate to the speed you want to maintain and then press the “Set” or “Cruise” button. The cruise control system will now maintain the speed you have set, allowing you to take your foot off the accelerator pedal. You can also use the “+” and “-” buttons on the steering wheel to adjust the speed in small increments.

It’s important to note that the cruise control system in the Mitsubishi Outlander is designed to maintain a constant speed. If you need to slow down or accelerate, you can do so manually by pressing the brake or accelerator pedal. Once you have adjusted your speed, you can reactivate the cruise control system by pressing the “Resume” or “Cruise” button.

Activating cruise control in your Mitsubishi Outlander is a straightforward process that can greatly enhance your driving experience. It allows you to relax and maintain a steady speed, especially during long drives. However, it’s important to remember that cruise control should only be used in appropriate driving conditions and when you can maintain full awareness of the road. Always be mindful of traffic and adjust your cruise control settings accordingly.

By mastering the cruise control feature in your Mitsubishi Outlander, you can enjoy a smoother and more comfortable driving experience. It not only reduces fatigue but also helps improve fuel efficiency. So, the next time you hit the road, don’t forget to activate cruise control and make the most out of your Mitsubishi Outlander’s advanced features. Safe travels!

Adjusting Cruise Control Settings

Adjusting cruise control settings in the Mitsubishi Outlander is a straightforward process that allows drivers to customize their driving experience. By following a few simple steps, you can easily modify the set speed, cancel or resume cruise control, and even adjust the following distance if applicable.

Step 1: Increase or decrease the set speed

One of the primary reasons drivers use cruise control is to maintain a consistent speed on long drives. However, there may be instances where you need to increase or decrease the set speed. To do this in the Mitsubishi Outlander, follow these steps:

  • Locate the cruise control buttons on the steering wheel. These buttons are usually labeled with symbols such as “+,” “-“, or arrows pointing up and down.
  • Press the “+” button or the arrow pointing up to increase the set speed. Each press will typically increase the speed by a predetermined increment, such as 1 or 2 miles per hour.
  • Press the “-” button or the arrow pointing down to decrease the set speed. Similarly, each press will decrease the speed by the same predetermined increment.

By adjusting the set speed according to your preferences or the road conditions, you can ensure a comfortable and safe driving experience.

Step 2: Cancel or resume cruise control

There may be situations where you need to temporarily disable cruise control or resume it after canceling. The Mitsubishi Outlander provides easy-to-use controls for canceling or resuming cruise control:

  • Locate the cruise control buttons on the steering wheel.
  • Look for a button labeled “Cancel” or an icon representing cancelation. Press this button to deactivate cruise control temporarily.
  • To resume cruise control, press the “Resume” button or an icon representing resumption. This will reactivate the previously set speed.

Canceling or resuming cruise control can be useful when encountering traffic, changing lanes, or navigating through areas with varying speed limits.

Step 3: Adjust the following distance (if applicable)

Some newer models of the Mitsubishi Outlander may come equipped with advanced cruise control features, such as adaptive cruise control. This feature allows the vehicle to automatically adjust its speed to maintain a safe following distance from the vehicle ahead. If your Outlander has this feature, you can adjust the following distance using the following steps:

  • Look for a button labeled “Following Distance” or an icon representing distance adjustment. Press this button to cycle through different following distance settings.
  • Each press of the button will typically increase or decrease the following distance by a predetermined increment, such as “Short,” “Medium,” or “Long.”

Adjusting the following distance ensures that your Mitsubishi Outlander maintains a safe gap from the vehicle in front, providing an added layer of safety during your journey.

By mastering the art of adjusting cruise control settings in the Mitsubishi Outlander, you can personalize your driving experience and make the most of this convenient feature. Whether it’s increasing or decreasing the set speed, canceling or resuming cruise control, or adjusting the following distance, these simple steps will help you navigate the roads with ease and efficiency. So, go ahead and explore the various cruise control settings in your Mitsubishi Outlander for a smoother and more enjoyable driving experience.

Using Additional Cruise Control Features

Cruise control is a convenient feature that allows drivers to maintain a steady speed without having to constantly press the accelerator pedal. However, the Mitsubishi Outlander offers more than just basic cruise control functionality. It comes equipped with additional features that enhance the driving experience and provide even more control on the road. In this section, we will explore these additional cruise control features and how to use them effectively.

Step 1: Utilizing the speed limiter function

The speed limiter function is a useful feature that allows drivers to set a maximum speed limit. This can be particularly helpful when driving in areas with speed restrictions or when you want to ensure that you don’t exceed a certain speed. To activate the speed limiter function in the Mitsubishi Outlander, follow these steps:

  • Turn on the cruise control system.
  • Set the desired maximum speed by pressing the appropriate buttons.

Once the speed limiter is set, the vehicle will not exceed the specified speed, even if you press the accelerator pedal. This feature provides an added layer of safety and helps you stay within legal speed limits.

Step 2: Engaging the adaptive cruise control (if available)

The Mitsubishi Outlander may also come equipped with adaptive cruise control, which takes cruise control to the next level. Adaptive cruise control uses sensors and radar technology to automatically adjust the vehicle’s speed based on the distance to the vehicle ahead. This feature is especially useful in heavy traffic or on long highway drives.

To engage adaptive cruise control, follow these steps:

  • Activate the cruise control system.
  • Set the desired speed as you would with regular cruise control.
  • Adjust the following distance using the controls provided.

The adaptive cruise control system will then maintain a safe distance from the vehicle ahead by automatically adjusting the speed. It will slow down or speed up as necessary to keep a safe following distance. This feature not only reduces driver fatigue but also enhances safety on the road.

Step 3: Exploring other advanced cruise control features

In addition to the speed limiter and adaptive cruise control, the Mitsubishi Outlander may offer other advanced cruise control features. These features can vary depending on the specific model and trim level. Some examples of advanced cruise control features include:

  • Lane-keeping assist: This feature helps keep the vehicle centered within the lane by making small steering adjustments.
  • Traffic jam assist: This feature can automatically control the vehicle’s speed and steering in stop-and-go traffic.
  • Emergency braking: This feature can automatically apply the brakes if a potential collision is detected.

To explore these advanced cruise control features, refer to the vehicle’s owner’s manual or consult with a Mitsubishi dealership. Familiarizing yourself with these features can greatly enhance your driving experience and provide an extra level of safety and convenience.

In conclusion, the Mitsubishi Outlander offers more than just basic cruise control functionality. With features like the speed limiter, adaptive cruise control, and other advanced cruise control features, drivers can enjoy a safer and more comfortable driving experience. By mastering these additional cruise control features, you can make the most out of your Mitsubishi Outlander and enjoy the benefits of modern automotive technology. So, don’t hesitate to explore and practice these features for a better driving experience.

Tips for Safe and Efficient Cruise Control Usage

Cruise control is a convenient feature that allows drivers to maintain a steady speed without having to constantly press the accelerator pedal. While it can make long drives more comfortable, it’s important to use cruise control safely and efficiently. Here are some tips to help you make the most of this feature in your Mitsubishi Outlander:

Maintain awareness and stay focused on the road

1. Even when using cruise control, it’s crucial to remain attentive and focused on the road. Cruise control is not a substitute for responsible driving. Keep your eyes on the road, hands on the steering wheel, and be prepared to take control of the vehicle if necessary.

2. Avoid distractions such as using your phone, eating, or engaging in other activities that may divert your attention from driving. Remember, cruise control is meant to assist you, not replace your active involvement in operating the vehicle.

Use cruise control in appropriate driving conditions

1. Cruise control is best suited for open highways or roads with minimal traffic. Avoid using it in heavy traffic, urban areas, or on winding roads where frequent speed adjustments are required.

2. It’s important to note that cruise control may not be suitable for certain weather conditions, such as heavy rain, snow, or ice. In such situations, it’s best to rely on manual control to ensure optimal safety.

Be mindful of traffic and adjust cruise control accordingly

1. When using cruise control, always be aware of the traffic around you. Maintain a safe following distance from the vehicle ahead to allow for unexpected stops or changes in speed.

2. If you encounter slower-moving vehicles or traffic congestion, it’s essential to adjust your cruise control settings accordingly. Use the controls to decrease your set speed or disengage cruise control temporarily until the road conditions improve.

3. Remember that cruise control is not meant to be used in situations that require frequent braking or acceleration. It’s important to use your judgment and override cruise control when necessary to ensure a safe driving experience.

By following these tips, you can use cruise control safely and efficiently in your Mitsubishi Outlander. Remember that responsible driving is always the key, and cruise control should be used as a helpful tool rather than a substitute for active engagement on the road.

In conclusion, cruise control is a valuable feature that can enhance your driving experience in the Mitsubishi Outlander. By understanding how to activate and adjust cruise control settings, as well as utilizing additional features like the speed limiter and adaptive cruise control, you can enjoy a more comfortable and efficient journey.

However, it’s crucial to prioritize safety and remain attentive while using cruise control. Maintain awareness, use cruise control in appropriate driving conditions, and be mindful of traffic to ensure a safe and enjoyable driving experience.

So, take the time to practice and explore the cruise control features in your Mitsubishi Outlander. Mastering cruise control will not only make your drives more convenient but also contribute to a safer and more enjoyable journey.

Troubleshooting Common Cruise Control Issues

Cruise control is a convenient feature that allows drivers to maintain a steady speed without having to constantly press the accelerator pedal. However, like any other technology, it can sometimes encounter issues. In this section, we will discuss some common cruise control problems and provide troubleshooting steps to help you resolve them.

Identify potential problems with cruise control

Before diving into troubleshooting, it’s important to identify the potential problems you may encounter with cruise control. Here are a few common issues:

Cruise control not engaging : Sometimes, you may find that your cruise control system fails to engage when you press the appropriate buttons. This can be frustrating, especially if you rely on cruise control for long drives.

Cruise control disengaging unexpectedly : Another problem you may face is the cruise control system disengaging on its own, even when you haven’t pressed the brake pedal or turned off the system manually.

Inconsistent speed control : Occasionally, you may notice that your cruise control system struggles to maintain a consistent speed. This can result in the vehicle speeding up or slowing down unexpectedly.

Provide troubleshooting steps for common issues

Now that we’ve identified the potential problems, let’s explore some troubleshooting steps to help you resolve these issues:

Check the cruise control fuse : Start by checking the fuse related to the cruise control system. If the fuse is blown, it can prevent the cruise control from functioning properly. Replace the fuse if necessary.

Inspect the brake pedal switch : The brake pedal switch plays a crucial role in cruise control operation. If the switch is faulty or misaligned, it can cause the cruise control to disengage unexpectedly. Inspect the switch and ensure it is functioning correctly.

Verify the speed sensor : The speed sensor provides crucial information to the cruise control system. If the sensor is malfunctioning, it can lead to inconsistent speed control. Check the sensor for any signs of damage or malfunction and replace it if needed.

Check for loose connections : Loose connections can disrupt the communication between the cruise control system and other components. Inspect the wiring and connectors associated with the cruise control system and ensure they are securely connected.

Reset the system : Sometimes, a simple system reset can resolve cruise control issues. Locate the cruise control module in your vehicle and disconnect the battery for a few minutes. Reconnect the battery and test the cruise control again.

Suggest seeking professional assistance if necessary

If you have followed the troubleshooting steps mentioned above and are still experiencing issues with your cruise control system, it may be time to seek professional assistance. Automotive technicians have the expertise and specialized tools to diagnose and repair complex cruise control problems.

Remember, attempting to fix advanced cruise control issues without proper knowledge can lead to further damage or even compromise your safety on the road. It’s always better to consult a professional if you’re unsure about any aspect of troubleshooting or repairing your cruise control system.

In conclusion, while cruise control is a convenient feature, it can encounter problems from time to time. By identifying potential issues and following the troubleshooting steps provided, you can resolve common cruise control problems and enjoy a smooth driving experience. If all else fails, don’t hesitate to seek professional help to ensure your cruise control system is functioning optimally.

Unveiling The Mystery: How Much Are Motorcycle Dealer Fees?

Discover The Distance: How Far Is Gardiner Ny From Me?

Decoding Honda Ridgeline Leasing Costs: How Much Does It Really Take?

Unveiling The Cost: How Much To Lease A Kia Stinger

Mastering The Clock: How To Change Time On Honda Fit

Unleashing The Limits: How Fast Can You Drive In Snow Mode?

Exploring The Distance: How Far Is La Quinta From Beverly Hills?

Mastering The Art Of Clearing The Service 4Wd Light On Ram 2500

Smooth Ride Solutions: How To Make Your Lifted Truck Glide Effortlessly

Step-By-Step Guide: Adding Transmission Fluid To 6.7 Powerstroke

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

  • Outlander OM
  • Outlander SM

Mitsubishi Outlander manuals

Mitsubishi Outlander: Cruise control

Cruise control is an automatic speed control system that lets you keep the same driving speed. It can be activated at 40 km/h (25 mph) or more.

● When you do not wish to drive at a constant speed, deactivate the cruise control function for safety.

● Do not use cruise control when driving conditions will not allow you to stay at the same speed, such as in heavy traffic or on roads that are winding, icy, snowy, wet, slippery or on a steep downhill slope.

● If you shift to “N” (Neutral) in cruise control mode without pressing the clutch first, the engine will run too fast and might be damaged.

● Cruise control may not be able to keep your speed on uphills or downhills.

Cruise control switches

A- “ON OFF” switch

Used to activate and deactivate the cruise control function.

B- “COAST SET” switch

Used to reduce the set speed and to set the speed of constantspeed driving.

C- “ACC RES” switch

Used to increase the set speed and, when constant-speed driving is finished, to return to the original set speed.

D- “CANCEL” switch

Used to terminate constant-speed driving.

● When operating the cruise control switches, correctly press each cruise control switch.

The cruise control may be turned off automatically if two or more of the cruise control switches are pressed at the same time.

“CRUISE” control indicator

This indicator will come on when the cruise control “ON OFF” switch (A) is pressed to turn on the cruise control system.

To activate

1. Lightly press the “ON OFF” switch (A).

● If the cruise control is on when the ignition switch is turned to “OFF” position, cruise control will turn on automatically and the “CRUISE” control indicator will illuminate the next time you start the engine.

● If the battery voltage is insufficient, the memory data for the cruise control will be erased. As a result, the “CRUISE” control indicator may not come on when you restart the engine. If this happens, press the “ON OFF” switch once again to activate the cruise control.

2. Press the “COAST SET” switch (B) while driving at the desired speed.

● The speed when you released the “COAST SET” switch will be set as the cruising speed.

● It is not possible to set the vehicle speed while driving in 1st gear.

To increase the set speed

There are 2 ways to increase the set speed.

“ACC RES” switch If you press and hold down the “ACC RES” switch (C), the speed will gradually increase. When you reach your desired speed, release the switch. Your cruising speed is now set.

To increase the speed in small amounts, press the “ACC RES” switch (C) for less than 1 second and release it. Every time you press the “ACC RES” switch (C), the speed will increase by approximately 1.6 km/h (1 mph).

Accelerator pedal

Use the accelerator pedal to reach your desired speed and then push the “COAST SET” switch (B) and release the switch momentarily to set a new desired cruising speed.

To decrease the set speed

There are 2 ways to reduce the set speed.

“COAST SET” switch Press and hold the “COAST SET” switch (B) while driving at the set speed, and you will slow down (coast) gradually.

When you reach desired speed, release the “COAST SET” switch. Your cruising speed is now set.

To decrease the speed in small amounts, press the “COAST SET” switch (B) for less than 1 second and release it. Every time you press the “COAST SET” switch (B), the speed will decrease by approximately 1.6 km/h (1 mph).

Brake pedal

Use the brake pedal, which disengages the cruise control, then push the “COAST SET” switch (B) and release the switch momentarily to set a new desired cruising speed.

To temporarily increase or decrease the speed

To temporarily increase the speed

Press the accelerator pedal as you would normally. When you release the pedal, you will return to your set speed.

To temporarily decrease the speed

Apply the brakes to decrease the speed. To return to the previously set speed, press the “ACC RES” switch. Refer to “To resume the set speed”.

To deactivate

The cruise control can be turned off as follows:

● Press the “ON OFF” switch (A) (cruise control function will be deactivated).

● Press the “CANCEL” switch (D).

● Depress the brake pedal or slightly tap it.

The cruise control can be turned off automatically in any of the following ways:

● By pressing the clutch pedal down.

● When your speed slows to about 35 km/h (22 mph) or less.

● When the active stability control (ASC) starts operating (if so equipped). Refer to “Active stability control (ASC)”.

To resume the set speed

If the cruise control is deactivated by the condition described in “To deactivate”, you can resume the previously set speed by pressing the “ACC RES” switch (C) while driving at a speed of approximately 40 km/h (25 mph) or greater.

Under either of the following conditions, however, using the switch does not allow you to resume the previously set speed.

In these situations, repeat the speed setting procedure:

● The cruise control is turned OFF.

● The ignition switch is turned to the “OFF” position.

  Reversing sensor system

  cargo loads,   trailer towing,   cleaning the interior of your vehicle,   split tailgate.

cruise control en mitsubishi

Cruise control

Cruise control is an automatic speed control system that keeps a set speed. It can be activated at about 40 km/h (25 mph) or more.

• When you do not wish to drive at a set speed, turn off the cruise control

• When you do not wish to drive at a set speed, turn off the cruise control for safety.

• Do not use cruise control when driving conditions will not allow you to stay at the same speed, such as in heavy traffic or on roads that are winding, icy, snowcovered, wet, slippery, on a steep downhill slope.

• On vehicles with M/T, do not move the gearshift lever to the “N” (Neutral) position while driving at a set speed without depressing the clutch pedal. The engine will run too fast and might be damaged.

• Cruise control may not be able to keep your speed on uphills or downhills.

• Cruise control may not be able to keep your speed on uphills or downhills.

• Your speed may decrease on a steep uphill.

You may use the accelerator pedal if you want to stay at your set speed.

• Your speed may increase to more than the set speed on a steep downhill. You must use the brake to control your speed. As a result, the set speed driving is deactivated.

Cruise control switches

A- “ON OFF” switch

Used to turn on and off the cruise control.

B- “COAST SET” switch

Used to reduce the set speed and to set the desired speed.

C- “ACC RES” switch

Used to increase the set speed and to return to the original set speed.

D- “CANCEL” switch

Used to deactivate the set speed driving.

• When operating the cruise control switches, press the cruise control switches

• When operating the cruise control switches, press the cruise control switches correctly.

The set speed driving may be deactivated automatically if two or more switches of the cruise control are pressed at the same time.

To activate

1. With the ignition switch is in the “ON” position or the operation mode is in ON, press the “ON OFF” switch (A) to turn on the cruise control. The “CRUISE” indication lamp in the meter cluster will come on.

• If the cruise control is on when the following operation is performed, cruise

• If the cruise control is on when the following operation is performed, cruise control will be on automatically the next time you start the engine. The “CRUISE” indication lamp will also be on.

[Except vehicles equipped with keyless operation system] Turn the ignition switch to the “LOCK” or “ACC” position.

[Vehicles equipped with keyless operation system] Put the operation mode in OFF or ACC.

• If the battery voltage is insufficient, the memory data for the cruise control may be erased.

As a result, the “CRUISE” indication lamp may not come on when you restart the engine.

If this happens, press the “ON OFF” switch once again to turn on the cruise control.

2. Accelerate or decelerate to your desired speed, then press and release the “COAST SET” switch (B) when the “CRUISE” indication lamp is illuminated. The vehicle will then maintain the desired speed.

• When you release the “COAST SET” switch, the vehicle speed will be set.

• When you release the “COAST SET” switch, the vehicle speed will be set.

To increase the set speed

There are 2 ways to increase the set speed.

“ACC RES” switch

Press and hold the “ACC RES” switch (C) while driving at the set speed, and your speed will then gradually increase.

When you reach your desired speed, release the switch. Your new cruising speed is now set.

To increase your speed in small amounts, press the “ACC RES” switch for less than about 1 second and release it.

Each time you press the “ACC RES” switch, your vehicle will go about 1.6 km/h (1 mph) faster.

Accelerator pedal

While driving at the set speed, use the accelerator pedal to reach your desired speed and then press the “COAST SET” switch (B) and release the switch momentarily to set a new desired cruising speed.

To decrease the set speed

There are 2 ways to decrease the set speed.

“COAST SET” switch

Press and hold the “COAST SET” switch (B) while driving at the set speed, and your speed will slow down gradually.

To slow down your speed in small amounts, press the “COAST SET” switch for less than about 1 second and release it.

Each time you press the “COAST SET” switch, your vehicle will slow down by about 1.6 km/h (1 mph).

Brake pedal

While driving at the set speed, use the brake pedal, which disengages the cruise control, then press the “COAST SET” switch (B) and release the switch momentarily to set a new desired cruising speed.

To temporarily increase or decrease the speed

To temporarily increase the speed

Depress the accelerator pedal as you would normally.

When you release the pedal, you will return to your set speed.

• In some driving conditions, the set speed driving may be deactivated. If this

• In some driving conditions, the set speed driving may be deactivated. If this happens, refer to “To activate” and repeat the speed setting procedure.

To temporarily decrease the speed

Depress the brake pedal to decrease the speed. To return to the previously set speed, press the “ACC RES” switch (C).

Refer to “To resume the set speed”.

To deactivate

The set speed driving can be deactivated as follows:

• Press the “ON OFF” switch (A) (Cruise control will be turned off) • Press the “CANCEL” switch (D). • Depress the brake pedal.

The set speed driving is deactivated automatically in any of the following ways.

• When you depress the clutch pedal (on vehicles with M/T). • When your speed slows to about 15 km/h (9 mph) or more below the set speed because of a hill, etc. • When your speed slows to about 40 km/h (25 mph) or less. • When the Active Stability Control (ASC) starts operating. (if so equipped) Refer to “Active stability control (ASC)”.

• On vehicles equipped with CVT, although the set speed driving will be deactivated

• On vehicles equipped with CVT, although the set speed driving will be deactivated when shifting to the “N” (NEUTRAL) position, never move the selector lever to the “N” (NEUTRAL) position while driving.

You would have no engine braking and could cause a serious accident.

Also, the set speed driving may be deactivated as follows:

• When the engine speed rises and approaches the tachometer's red zone (the red-coloured part of the tachometer dial).

• When the set speed driving is deactivated automatically in any situation

• When the set speed driving is deactivated automatically in any situation other than those listed above, there may be a system malfunction.

Press the “ON-OFF” switch to turn off the cruise control and have your vehicle inspected by a MITSUBISHI MOTORS Authorized Service Point.

To resume the set speed

If the set speed driving is deactivated by the condition described in “To deactivate”, you can resume the previously set speed by pressing the “ACC RES” switch (C) while driving at a speed of about 40 km/h (25 mph) or higher.

Under either of the following conditions, however, using the switch does not allow you to resume the previously set speed.

In these situations, repeat the speed setting procedure:

• The “ON OFF” switch is pressed.

[Except vehicles equipped with keyless operation system]

Turn the ignition switch to the “LOCK” or “ACC” position.

Put the operation mode in OFF or ACC.

• “CRUISE” indication lamp is turned OFF.

Vanity mirror A vanity mirror is fitted to the back of the sun visor. ...

Audio system Type 1- LW/MW/FM digital turning radio with CD player Type 2- LW/MW/FM digital turning radio with CD changer For information on operations of the audio system for vehicles equipped with MITSUBIS ...

Accessory socket CAUTION • Be sure to use a “plug-in” type accessory operating at 12 V and at 120 W or less. When using more than one socket at the same time, make sure that the electrical accessories are ...

  • Mitsubishi Lancer
  • Mitsubishi Carisma
  • Mitsubishi Outlander
  • Mitsubishi ASX

GearShifters

How To Use Cruise Control Mitsubishi Lancer

1. Press the ON/OFF switch while the ignition switch is in the ON position (A)

the cruise control to be activated. meter cluster’s CRUISE indicator lamp

will start.

If the ignition switch is set to the LOCK position and the cruise control is activated

the following time you start your car, cruise control will turn on automatically.

the motor. Additionally, the CRUISE indicator lamp will be on.

The cruise control memory data will not function if the battery voltage is insufficient.

can be removed.

As a result, when you restart the engine, the CRUISE indicator bulb might not illuminate.

If this occurs, restart the cruise control by pressing the ON/OFF switch.

2. Verify that the vehicle’s Twin Clutch SST control mode is set to NORMAL.

using Twin Clutch SST). Take note of the Twin Clutch SST control mode.

When the Twin Clutch SST control mode is selected, the cruising speed cannot be changed.

to the SPORT mode.

3. After reaching the required speed, accelerate or decelerate.

When the CRUISE indicator lamp is on, press the COAST SET switch (B). the automobile

will then keep the desired speed going.

In This Article...

How does a Mitsubishi Lancer’s cruise control turn off?

You can disable the set speed driving by doing the following:

Click the “OFF/ON switch (A). (The cruise control will be disabled.) Click the “Turn off switch (D). To stop, apply the brakes.

Does the Mitsubishi Lancer model from 2003 have cruise control?

The Mitsubishi Lancer will continue to be produced for a second year.

Mitsubishi unveiled the Lancer Evolution, a special variant with 271 horsepower and 17-inch wheels, in the middle of the year.

ES, LS, and O-Z Rally are the three Lancer body types. All Lancers come equipped as standard with a CD player, power steering, front bucket seats, cloth upholstery, and full power equipment. Cruise control, keyless entry, and alloy wheels are features of the LS and O-Z.

The 2.0 liter inline four that powers the Lancer produces 120 horsepower and 130 pound-feet of torque.

A four-speed automatic transmission is an option for the ES and O-Z models, which come standard with a five-speed manual transmission. The LS van will only have an automatic. 26/33 mpg for the manual and 24/30 mpg for the automatic are the projected fuel economy ratings.

Mitsubishi’s cheap Mirage was replaced by the Lancer, which offers a more luxurious ride and a more roomy interior.

When fitted with a manual transmission, the Lancer accelerates reasonably well, although the automatic is rather unresponsive.

The cabin is shielded from annoying road and wind noise, and handling abilities are above average for its class.

Customers have criticized the Lancer for lacking safety features, such as ABS and side airbags, which are only offered on the mid-level LS model.

What does a car’s cruise control do?

If you drive at a consistent speed, cruise control is a useful feature. You can set your car to a specific pace using an electric system, which frees up your foot from the accelerator pedal. Therefore, it can reduce stress and foot tiredness after a long drive. Utilizing cruise control will also result in higher fuel efficiency, which is a wonderful perk. If you drive at a constant speed rather than accelerating on each stretch of open road, your car will use a lot less fuel. Sharp acceleration causes your engine to work harder, spending up to 60% more gasoline than someone who employs cruise control. Ultimately, if you let your car to keep a constant cruising speed on its own, you can easily conserve fuel.

Adaptive cruise control is the state-of-the-art in cruise control today. Now, this smart system will be in almost all autos. With adaptive cruise control, you can choose your preferred travel speed just like with traditional cruise control. The adaptive cruise control, on the other hand, uses the forward-mounted sensors to maintain a safe distance and constant speed between your vehicle and the vehicle in front of you. For instance, adaptive cruise control will automatically lower the speed of your car and maintain the predetermined distance if the automobile in front of it starts to slow down. Many claim that adaptive cruise control is a potential step toward driverless vehicles. Since you must maintain complete control of the vehicle and keep your hands on the wheel, autonomous driving is not nearly possible.

ACC Res: What Does It Mean?

Accelerate/resume is referred to as ACC/RES. Once the cruise has been set and has been interrupted for whatever reason (a stoplight, for example), you can hit resume and the vehicle will cruise at the chosen MPH.

Whether the Evo 8 has cruise control

The Rostra Cruise Control kit is intended to install a cruise control system in vehicles that did not already have one.

Using a Rostra cruise control switch that is positioned on the steering column, you can choose the speed you want to travel at (sold separately).

The Rostra cruise control monitors engine load and speed after you choose your preferred speed to guarantee that your car maintains that pace while driving.

For convenience, you can utilize this switch to quickly slow down or speed up from your cruise. Set speed, tap up/down (1 mph per tap), coast/reduce speed, resume/accelerate, and controlled resume rate are all features of the cruise controls.

Is it acceptable to always utilize the cruise control?

Using cruise control when driving in the rain, snow, hail, sleet or ice, slipperyroads can affect the system’s ability to maintain a constant vehicle speed. When using cruise control at an excessively high speed on rainy roads, the car may hydroplane if it hits any standing water. Operation of the cruise control may cause a skid or spin on conditions with very little traction, such as ice and snow. Avoid using cruise control on slick roads and drive carefully.

Use of brakes during cruise control

The throttle is used by cruise control to regulate your car’s speed in the same manner as you would. The throttle cable and the cable used by the cruise control, which is powered by an actuator via a vacuum instead of the throttle pedal, are typically located side by side in a car with a cable-driven throttle. When the cruise control is activated, the throttle cable moves along with the actuator’s “second” cable.

Naturally, the system will be an electrical setup in a car with a fly-by-wire throttle. However, in both cases, the system is intended to alter the engine’s output, which accelerates or retards the vehicle. Usually, the cruise control only affects the throttle, never the brakes. Additionally, if your vehicle has an automatic transmission, shifting gears won’t interfere with cruise control.

How fast does cruise control function?

With cruise control, you can maintain a minimum speed of 25 mph or more without having to press the pedal all the time. Use your cruise control sparingly when: When you CANNOT drive safely at a constant speed, cruise control can be hazardous.

A REAL SENSE FOR SAFETY

The road ahead can be unpredictable, which is why the 2023 Mitsubishi Outlander Plug-in Hybrid comes prepared with a suite of advanced safety features.

ADVANCED DRIVER ASSIST SYSTEMS

Multilayered Peace of Mind

Lane departure warning.

The Lane Departure Warning 5 system continually monitors your current lane position and gives you a gentle audible and visual alert if it senses you might be unintentionally drifting.

FORWARD COLLISION MITIGATION WITH PEDESTRIAN DETECTION

If a car or pedestrian is detected in front of you, Forward Collision Mitigation 6 will let you know. If the brakes are not applied and the vehicle detects that a risk of collision is imminent, the vehicle will attempt to stop.

REAR CROSS TRAFFIC ALERT

Your back is covered, too. Rear Cross Traffic Alert 7 scans the area behind the vehicle for nearby objects while you’re in reverse and will issue an audible warning immediately if it senses anything.

BLIND SPOT WARNING

If another vehicle approaches a blind spot, Blind Spot Warning 8 will flash a warning light in the corresponding side mirror. If you activate your indicator, an audible and visual alert will tell you it’s not safe to change lanes.

Thoughtful technologies provide multiple layers of protection to help give you confidence, so you can focus on the fun of getting there.

MI-PILOT ASSIST

Meet your co-pilot.

Help reduce the stress of long-distance driving with a little help from available MI-PILOT Assist™, 2 an advanced driver-assist system that helps you stay centered in your lane. Using cameras and radar, MI-PILOT works to adjust your steering input, helping to reduce speed when navigating curves and keep pace in stop-and-go traffic. That means you can enjoy longer road trips and more enjoyable drives.

MULTI-VIEW CAMERA SYSTEM

Get the whole picture, take the next step in discovering your ride.

¹ Manufacturer's Suggested Retail Price. Excludes destination/handling, tax, title, license, dealer charges, and options. While supplies last. Limited availability at participating dealers may require placing an order and could cause a delay in delivery. Retailer price, terms and vehicle availability may vary. See your local Mitsubishi retailer for details.

² MI-PILOT Assist is a driver assistance system only and is not a substitute for safe and careful driving. The driver must remain engaged with the driving task and monitor the environment at all times.

³ Available feature. The Multi-View Camera system is a driver aid only and is not a substitute for visual confirmation. The view on the screen is limited and objects outside that view will not be seen.

⁴ Advanced Driver Assist Systems are driver aids only and are not substitutes for safe and careful driving. Under certain circumstances, these systems may not sound an alert, provide steering input, or apply braking. The driver must remain engaged with the driving task and monitor the environment at all times. See Owner’s Manual for further information.

⁵ Available feature. The Lane Departure Warning system is designed to read lane marks under certain conditions. It is not a collision avoidance system or a substitute for safe and careful driving practices.

⁶ Standard feature. The Forward Collision Mitigation (FCM  ) with Pedestrian Detection system is a driver aid only and is not a substitute for safe and careful driving. Under certain circumstances, the system may not detect other vehicles and/or pedestrians correctly. Available on the Outlander, Outlander Sport, Outlander PHEV, Mirage, Mirage G4 and Eclipse Cross.

⁷ Advanced Driver Assist Systems are driver aids only and are not substitutes for safe and careful driving. Under certain circumstances, these systems may not sound an alert, provide steering input, or apply braking. The driver must remain engaged with the driving task and monitor the environment at all times. See Owner’s Manual for further information. Not available on all models.

⁸ Available feature. The Blind Spot Warning (BSW) system is a driver aid only and is not a substitute for safe and careful driving. Under certain circumstances, this system may not detect other vehicles correctly.

Mitsubishi Forums banner

  • Forum Listing
  • Marketplace
  • Advanced Search
  • Mitsubishi Models
  • Lancer Forum
  • 2008+ Lancer
  • Car Audio, Video & Electronics

Cruise Control

cruise control en mitsubishi

  • Add to quote

I use my cruise all the time, lots of highway driving. Last week I noticed that it stopped working, or at least I thought it did. I would turn it on, hit the set button, and nothing would happen. It wouldn't engage. After a few days of that it all of a sudden started working again. So the last few days I did some trouble shooting, here's what I found. The cruise control will not engage / activate in the morning, and only in the morning. This would be after the car has been sitting in my garage all night and at about 6am in the morning. Of course it's always colder in the morning as well. Once I go out to lunch later in the day it will start working just fine again and will work for the rest of the day, until the next morning. I'll probably have have the dealer look at it, but just wondering if anyone has seen anything like this before and have any suggestions as to what the prob is? I guessing the cold or maybe condensation is shorting something out, then as it warms up and/or drys out it works again? Idk, looking for suggestions. Thanks.  

i wake up in the morning and drive an hour on the highway to work and it works fine for me. defect, take it in.  

I use my cruise all the time, lots of highway driving. Last week I noticed that it stopped working, or at least I thought it did. I would turn it on, hit the set button, and nothing would happen. It wouldn't engage. After a few days of that it all of a sudden started working again. So the last few days I did some trouble shooting, here's what I found. The cruise control will not engage / activate in the morning, and only in the morning. This would be after the car has been sitting in my garage all night and at about 6am in the morning. Of course it's always colder in the morning as well. Once I go out to lunch later in the day it will start working just fine again and will work for the rest of the day, until the next morning. I'll probably have have the dealer look at it, but just wondering if anyone has seen anything like this before and have any suggestions as to what the prob is? I guessing the cold or maybe condensation is shorting something out, then as it warms up and/or drys out it works again? Idk, looking for suggestions. Thanks.[/b] Click to expand...

Ok, here's what I found out: (and I've recently saw this same problem reported in other forums as well) Using LEDs bulbs in your tail lights will cause issues with the cruise control, the blinkers, and the tail lights. LEDs can be used in the city lights, reverse lights, and license plate lights with no problems. Issues with the cruise control happen when you put a LED in the combo tail/stop lights. (the outside red light that lights up when you step on the brake pedal). The cruise control circuit is tied into the brake light circuit, this is how the cruise control disengages when you press the brake pedal. When you put an LED in the tail/stop light the cruise control circuit has issues with this. Since LEDs draw less current than regular filament bulbs, the cruise control circuit thinks your pressing the brake and therefore will not engage when you try to set it. This only happens when the car lights are on. If the lights are off the cruise control functions normally. I tried several different kinds of LEDs and I had the cruise control problem with all of them. Any LED in the tail/stop light will stop the cruise control from engaging when your cars lights are turned on. Also note that the aftermarket LED tail lights (the complete assembly, not just bulbs), which a few different sites are selling, will also cause the same issue with the cruise control. There are a few ways to address the issue. Don't use LEDs in the tail lights, stick with colored filament bulbs if all you want is better color. If you want aftermarket tail lights, stick with the ralliart style black taillights as the LED style will cause problems. If you use LEDs, wire resistors into the brake light circuit to trick the cruise control into thinking the correct amps are being drawn.  

Awesome info! Thank you! Curious how this ties into the issue with you not being able to cruise in the early morn, but fine in afternoon?[/b] Click to expand...
Ok, here's what I found out: (and I've recently saw this same problem reported in other forums as well) Using LEDs bulbs in your tail lights will cause issues with the cruise control, the blinkers, and the tail lights. LEDs can be used in the city lights, reverse lights, and license plate lights with no problems. Issues with the cruise control happen when you put a LED in the combo tail/stop lights. (the outside red light that lights up when you step on the brake pedal). The cruise control circuit is tied into the brake light circuit, this is how the cruise control disengages when you press the brake pedal. When you put an LED in the tail/stop light the cruise control circuit has issues with this. Since LEDs draw less current than regular filament bulbs, the cruise control circuit thinks your pressing the brake and therefore will not engage when you try to set it. This only happens when the car lights are on. If the lights are off the cruise control functions normally. I tried several different kinds of LEDs and I had the cruise control problem with all of them. Any LED in the tail/stop light will stop the cruise control from engaging when your cars lights are turned on. Also note that the aftermarket LED tail lights (the complete assembly, not just bulbs), which a few different sites are selling, will also cause the same issue with the cruise control. There are a few ways to address the issue. Don't use LEDs in the tail lights, stick with colored filament bulbs if all you want is better color. If you want aftermarket tail lights, stick with the ralliart style black taillights as the LED style will cause problems. If you use LEDs, wire resistors into the brake light circuit to trick the cruise control into thinking the correct amps are being drawn.[/b] Click to expand...
can you go into detail as to what exactly happens with the blinkers with LED tail-lights? i purchased the smoke led tail-light combo a while back and i havent come across any problems with my blinkers....my cruise control however does not work with these lights whether the city lights are on or off which is weird cause you say yours works with them off[/b] Click to expand...

My cruise control doesn’t work and my volume buttons don’t work on my steering wheel do u also think that could be the reason?  

  • ?            
  • 362.9K posts
  • 118.2K members

Top Contributors this Month

cruise control en mitsubishi

¿Qué es el modo “Cruise control” en los autos y cómo funciona?

¿conduces en carretera por varias horas este sistema es para ti.

Tu auto pudiera ya contar con un sistema de control de velocidad, conocido como "cruise control"

Tu auto pudiera ya contar con un sistema de control de velocidad, conocido como "cruise control"  Crédito: Pexels

Avatar de La Opinión

Por   La Opinión

Bienvenido a nuestra guía de  Consejos para Automovilistas , donde encontrarás tips y consejos para conducir más seguro en carretera.

Los viajes largos de carretera terminan agotando a un conductor e impidiendo que él o ella disfrute de los paisajes.

Después de unas horas de conducir por la autopista, los conductores pierden la noción de la velocidad e incluso el camino, pues la imagen de éste se vuelve tan repetitiva que termina confundiéndolos y haciendo que pierdan el control de la velocidad.

Por esa razón, los fabricantes implementaron en los modelos más recientes una tecnología conocida como Cruise Control , un sistema que controlar la velocidad de un vehículo para que el conductor no tenga que mantener su pie en el acelerador todo el tiempo.

El Cruise Control –  también conocido como speed control , autocruise o  tempomat – controla la válvula de aceleración para mantener una velocidad continua a través de un cable conectado a un solenoide, en lugar de presionar un pedal. La válvula de mariposa controla la potencia y la velocidad del motor al limitar la cantidad de aire que absorbe, ya que es un motor de combustión interna, explica Science ABC .

Por lo general, el conductor aumenta o disminuye la velocidad simplemente utilizando unos botones en su volante o una palanca parecida a la de las luces intermitentes (el diseño y mecanismo depende del fabricante), y el símbolo del Cruise se ve en el tablero de la siguiente manera:

cruise control en mitsubishi

Aunque esta “nueva tecnología” parezca el descubrimiento del siglo, la verdad es que fue James Watt, un ingeniero mecánico, quien la inventó por primera vez en el siglo 17, cuando él trataba de mantener la velocidad constante de las máquinas de vapor.

La tecnología como la conocemos ahora se comenzó a usar en autos en los años 40.

Las versiones más actualizadas y modernas del Cruise , como el Adaptive Cruise Control , ya pueden determinar la velocidad necesaria para acelerar o frenar dependiendo de el flujo en carretera.

Te puede interesar:

  • Cómo escapar si vas cayendo por una colina con tu auto
  • Cómo sobrevivir un intento de robo de tu auto… mientras estás tú en él

En esta nota

La luna llena de mayo significa un periodo de bienestar para algunos signos del zodiaco.

La luna llena de mayo 2024 marca un ciclo de fortuna para 3 signos zodiacales

La luna llena de mayo trae fortuna para algunos signos del horóscopo chino.

4 signos del horóscopo chino reciben un golpe de suerte gracias a la Luna de Flores 2024

Julián Quiñones, delantero del América, se lamenta tras desaprovechar una oportunidad de gol en el segundo tiempo de la final contra Cruz Azul.

El América se repone de error infantil y obtiene empate de 1-1 en juego de ida de la final mexicana

A dos años de la masacre en Uvalde, Biden insiste en restringir las armas de asalto

A dos años de la masacre en Uvalde, Biden insiste en restringir las armas de asalto

Las horas exactas tienen diversos significados.

Ver la hora exacta en el reloj no es casualidad, según la numerología

Suscribite al boletín de noticias, recibe gratis las noticias más importantes diariamente en tu email.

Este sitio está protegido por reCAPTCHA y Google Política de privacidad y Se aplican las Condiciones de servicio .

¡Muchas gracias!

Forecast night icon

  • Top Stories More News
  • Today's National Outlook
  • Hurricane Tracker
  • Snow & Ski Forecast
  • Cold & Flu
  • Allergy Forecast
  • Fire Updates
  • Traffic Cameras
  • Weather Cameras
  • Outdoor Sports Guide

Rusmania

  • Yekaterinburg
  • Novosibirsk
  • Vladivostok

cruise control en mitsubishi

  • Tours to Russia
  • Practicalities
  • Russia in Lists
Rusmania • Deep into Russia

Out of the Centre

Savvino-storozhevsky monastery and museum.

Savvino-Storozhevsky Monastery and Museum

Zvenigorod's most famous sight is the Savvino-Storozhevsky Monastery, which was founded in 1398 by the monk Savva from the Troitse-Sergieva Lavra, at the invitation and with the support of Prince Yury Dmitrievich of Zvenigorod. Savva was later canonised as St Sabbas (Savva) of Storozhev. The monastery late flourished under the reign of Tsar Alexis, who chose the monastery as his family church and often went on pilgrimage there and made lots of donations to it. Most of the monastery’s buildings date from this time. The monastery is heavily fortified with thick walls and six towers, the most impressive of which is the Krasny Tower which also serves as the eastern entrance. The monastery was closed in 1918 and only reopened in 1995. In 1998 Patriarch Alexius II took part in a service to return the relics of St Sabbas to the monastery. Today the monastery has the status of a stauropegic monastery, which is second in status to a lavra. In addition to being a working monastery, it also holds the Zvenigorod Historical, Architectural and Art Museum.

Belfry and Neighbouring Churches

cruise control en mitsubishi

Located near the main entrance is the monastery's belfry which is perhaps the calling card of the monastery due to its uniqueness. It was built in the 1650s and the St Sergius of Radonezh’s Church was opened on the middle tier in the mid-17th century, although it was originally dedicated to the Trinity. The belfry's 35-tonne Great Bladgovestny Bell fell in 1941 and was only restored and returned in 2003. Attached to the belfry is a large refectory and the Transfiguration Church, both of which were built on the orders of Tsar Alexis in the 1650s.  

cruise control en mitsubishi

To the left of the belfry is another, smaller, refectory which is attached to the Trinity Gate-Church, which was also constructed in the 1650s on the orders of Tsar Alexis who made it his own family church. The church is elaborately decorated with colourful trims and underneath the archway is a beautiful 19th century fresco.

Nativity of Virgin Mary Cathedral

cruise control en mitsubishi

The Nativity of Virgin Mary Cathedral is the oldest building in the monastery and among the oldest buildings in the Moscow Region. It was built between 1404 and 1405 during the lifetime of St Sabbas and using the funds of Prince Yury of Zvenigorod. The white-stone cathedral is a standard four-pillar design with a single golden dome. After the death of St Sabbas he was interred in the cathedral and a new altar dedicated to him was added.

cruise control en mitsubishi

Under the reign of Tsar Alexis the cathedral was decorated with frescoes by Stepan Ryazanets, some of which remain today. Tsar Alexis also presented the cathedral with a five-tier iconostasis, the top row of icons have been preserved.

Tsaritsa's Chambers

cruise control en mitsubishi

The Nativity of Virgin Mary Cathedral is located between the Tsaritsa's Chambers of the left and the Palace of Tsar Alexis on the right. The Tsaritsa's Chambers were built in the mid-17th century for the wife of Tsar Alexey - Tsaritsa Maria Ilinichna Miloskavskaya. The design of the building is influenced by the ancient Russian architectural style. Is prettier than the Tsar's chambers opposite, being red in colour with elaborately decorated window frames and entrance.

cruise control en mitsubishi

At present the Tsaritsa's Chambers houses the Zvenigorod Historical, Architectural and Art Museum. Among its displays is an accurate recreation of the interior of a noble lady's chambers including furniture, decorations and a decorated tiled oven, and an exhibition on the history of Zvenigorod and the monastery.

Palace of Tsar Alexis

cruise control en mitsubishi

The Palace of Tsar Alexis was built in the 1650s and is now one of the best surviving examples of non-religious architecture of that era. It was built especially for Tsar Alexis who often visited the monastery on religious pilgrimages. Its most striking feature is its pretty row of nine chimney spouts which resemble towers.

cruise control en mitsubishi

Plan your next trip to Russia

Ready-to-book tours.

Your holiday in Russia starts here. Choose and book your tour to Russia.

REQUEST A CUSTOMISED TRIP

Looking for something unique? Create the trip of your dreams with the help of our experts.

Follow Puck Worlds online:

  • Follow Puck Worlds on Twitter

Site search

Filed under:

  • Kontinental Hockey League

Gagarin Cup Preview: Atlant vs. Salavat Yulaev

Share this story.

  • Share this on Facebook
  • Share this on Twitter
  • Share this on Reddit
  • Share All sharing options

Share All sharing options for: Gagarin Cup Preview: Atlant vs. Salavat Yulaev

Gagarin cup (khl) finals:  atlant moscow oblast vs. salavat yulaev ufa.

Much like the Elitserien Finals, we have a bit of an offense vs. defense match-up in this league Final.  While Ufa let their star top line of Alexander Radulov, Patrick Thoresen and Igor Grigorenko loose on the KHL's Western Conference, Mytischi played a more conservative style, relying on veterans such as former NHLers Jan Bulis, Oleg Petrov, and Jaroslav Obsut.  Just reaching the Finals is a testament to Atlant's disciplined style of play, as they had to knock off much more high profile teams from Yaroslavl and St. Petersburg to do so.  But while they did finish 8th in the league in points, they haven't seen the likes of Ufa, who finished 2nd. 

This series will be a challenge for the underdog, because unlike some of the other KHL teams, Ufa's top players are generally younger and in their prime.  Only Proshkin amongst regular blueliners is over 30, with the work being shared by Kirill Koltsov (28), Andrei Kuteikin (26), Miroslav Blatak (28), Maxim Kondratiev (28) and Dmitri Kalinin (30).  Oleg Tverdovsky hasn't played a lot in the playoffs to date.  Up front, while led by a fairly young top line (24-27), Ufa does have a lot of veterans in support roles:  Vyacheslav Kozlov , Viktor Kozlov , Vladimir Antipov, Sergei Zinovyev and Petr Schastlivy are all over 30.  In fact, the names of all their forwards are familiar to international and NHL fans:  Robert Nilsson , Alexander Svitov, Oleg Saprykin and Jakub Klepis round out the group, all former NHL players.

For Atlant, their veteran roster, with only one of their top six D under the age of 30 (and no top forwards under 30, either), this might be their one shot at a championship.  The team has never won either a Russian Superleague title or the Gagarin Cup, and for players like former NHLer Oleg Petrov, this is probably the last shot at the KHL's top prize.  The team got three extra days rest by winning their Conference Final in six games, and they probably needed to use it.  Atlant does have younger regulars on their roster, but they generally only play a few shifts per game, if that. 

The low event style of game for Atlant probably suits them well, but I don't know how they can manage to keep up against Ufa's speed, skill, and depth.  There is no advantage to be seen in goal, with Erik Ersberg and Konstantin Barulin posting almost identical numbers, and even in terms of recent playoff experience Ufa has them beat.  Luckily for Atlant, Ufa isn't that far away from the Moscow region, so travel shouldn't play a major role. 

I'm predicting that Ufa, winners of the last Superleague title back in 2008, will become the second team to win the Gagarin Cup, and will prevail in five games.  They have a seriously well built team that would honestly compete in the NHL.  They represent the potential of the league, while Atlant represents closer to the reality, as a team full of players who played themselves out of the NHL. 

  • Atlant @ Ufa, Friday Apr 8 (3:00 PM CET/10:00 PM EST)
  • Atlant @ Ufa, Sunday Apr 10 (1:00 PM CET/8:00 AM EST)
  • Ufa @ Atlant, Tuesday Apr 12 (5:30 PM CET/12:30 PM EST)
  • Ufa @ Atlant, Thursday Apr 14 (5:30 PM CET/12:30 PM EST)

Games 5-7 are as yet unscheduled, but every second day is the KHL standard, so expect Game 5 to be on Saturday, like an early start. 

Loading comments...

IMAGES

  1. Mitsubishi Mirage

    cruise control en mitsubishi

  2. Mengenal Fungsi dan Kegunaan Dari Fitur Cruise Control

    cruise control en mitsubishi

  3. Memahami Penggunaan Fitur Cruise Control

    cruise control en mitsubishi

  4. how to use the cruise control in your car mitsubishi pajero sports

    cruise control en mitsubishi

  5. Installing Cruise Control on my '10 Lancer ES : r/mitsubishi

    cruise control en mitsubishi

  6. Mitsubishi Mirage

    cruise control en mitsubishi

VIDEO

  1. Every Comfy Experience is in Mitsubishi XFORCE!

  2. Установка круиз контроля на мотоцикл / installation of cruise control on a motorcycle

  3. Все функции круиз контроля! Chevrolet Cruze

  4. For everyone with an adventurous spirit

  5. установка круиз-контроль на Mitsubishi ASX,Lancer,Outlander

  6. Como usar el Cruise Control y para que sirve

COMMENTS

  1. How To Use Cruise Control on a Mitsubishi Model

    In this weeks How-to video we are learning how to use the Cruise Control in your Mitsubishi model. I know it sounds easy, but Cruise Control operates differe...

  2. 2021 Mitsubishi outlander

    This video shows you step by step on how to use cruise control on a 2021 Mitsubishi outlander.Happy to answer any questions, drop them in the comment section...

  3. How to Operate the Adaptive Cruise Control (ACC) System on ...

    Find out how the Adaptive Cruise Control (ACC) works with radar technology to help the OUTLANDER PHEV maintain a safe driving distance between you and the ve...

  4. 2024 Mitsubishi Outlander PHEV Safety

    The Multi-View Camera system is a driver aid only and is not a substitute for visual confirmation. The view on the screen is limited and objects outside that view will not be seen. Find out the latest safety features in the 2024 Mitsubishi Outlander PHEV including adaptive cruise control, reversing camera, sensors and more.

  5. How to Use Cruise Control on Your Mitsubishi Outlander 2024

    You can adjust your cruise control speed at any time by following these steps: 1. Press the + button on the cruise control stalk to increase your speed. 2. Press the - button on the cruise control stalk to decrease your speed. 3. Press the set button on the cruise control stalk to confirm your new speed.

  6. How To Set Cruise Control On 2022 Mitsubishi Outlander

    Your preferred speed. has been set. Press the COAST SET switch (B) to gradually reduce the speed. Release it after less than one second. When you flip the COAST SET switch (B), There will be a 1.6 km/h speed reduction (1 mph). Push the COAST button after using the brake pedal to turn off the cruise control.

  7. Mastering Cruise Control: A Step-By-Step Guide For Mitsubishi Outlander

    Step 2: Cancel or resume cruise control. Step 3: Adjust the following distance (if applicable) Using Additional Cruise Control Features. Step 1: Utilizing the speed limiter function. Step 2: Engaging the adaptive cruise control (if available) Step 3: Exploring other advanced cruise control features.

  8. Mitsubishi Outlander

    If this happens, press the "ON OFF" switch once again to activate the cruise control. 2. Press the "COAST SET" switch (B) while driving at the desired speed. NOTE: The speed when you released the "COAST SET" switch will be set as the cruising speed. It is not possible to set the vehicle speed while driving in 1st gear.

  9. Cruise control

    Press the "ON-OFF" switch to turn off the cruise control and have your vehicle inspected by a MITSUBISHI MOTORS Authorized Service Point. To resume the set speed If the set speed driving is deactivated by the condition described in "To deactivate", you can resume the previously set speed by pressing the "ACC RES" switch (C) while ...

  10. How To Install Cruise Control In A Mitsubishi Mirage

    A cruise control system for your car will typically cost between $200 and $350 to install. Although it is rather simple to install on your own, you may decide to hire a specialist to do it instead. If you choose this approach, the overall cost will increase by about $100 to $250.

  11. Using Mitsubishi Cruise Control

    Learn how to use Mitsubishi Cruise Control in the new Outlander. In this video Sierra will show how to enable and disable the Cruise Control feature on the N...

  12. How To Use Cruise Control Mitsubishi Lancer

    Mitsubishi / By The GearShifters Team. 1. Press the ON/OFF switch while the ignition switch is in the ON position (A) the cruise control to be activated. meter cluster's CRUISE indicator lamp. will start. If the ignition switch is set to the LOCK position and the cruise control is activated. the following time you start your car, cruise ...

  13. Mitsubishi Cruise Control Kits & Switches for Sale

    250-9008 Mitsubishi Raider 2007-2011 Complete OEM Cruise Control Kit. $264.95. Add to Cart. 12 of 12 Items. Choose from many different cruise control kits at The Cruise Control Store, including complete kits for Mitsubishi vehicles. View our selection here.

  14. 2023 Mitsubishi Outlander PHEV Safety

    The Blind Spot Warning (BSW) system is a driver aid only and is not a substitute for safe and careful driving. Under certain circumstances, this system may not detect other vehicles correctly. Find out the latest safety features in the 2023 Mitsubishi Outlander PHEV including adaptive cruise control, reversing camera, sensors and more.

  15. Cruise Control

    The cruise control will not engage / activate in the morning, and only in the morning. This would be after the car has been sitting in my garage all night and at about 6am in the morning. ... A forum community dedicated to all Mitsubishi owners and enthusiasts. Come join the discussion about the Eclipse, Outlander, Mirage, Galant, Lancer ...

  16. ¿Qué es el modo "Cruise control" en los autos y cómo funciona?

    Por esa razón, los fabricantes implementaron en los modelos más recientes una tecnología conocida como Cruise Control, un sistema que controlar la velocidad de un vehículo para que el ...

  17. Description of the Kontragent database

    The Kontragent database provides a twenty-four-hour online access to financial information of Russian companies. Our database contains annual financial statements and contact details of companies. By accessing data you also getting an actual data record from EGRUL. Currently our database has detailed information on 12.2 million Russian companies.

  18. 2022 Mitsubishi Outlander

    How Adaptive Cruise Control (ACC) with Stop & Go OperatesSubscribe to the Mitsubishi Motors North America YouTube channel: https://www.youtube.com/user/Mitsu...

  19. Super Cruise para determinados vehículos

    Es tan fácil como "1, 2, 3". Habilita la tecnología de conducción a manos libres Super Cruise en tres pasos simples. Cuando está activada, Super Cruise funciona con Adaptive Cruise Control † para controlar la aceleración y los frenos, y con Onstar para garantizar que tu vehículo reciba las últimas actualizaciones. Utiliza un posicionamiento preciso en tiempo real, cámaras, sensores y ...

  20. Moscow, Moskovskaya oblast', RU

    Outdoor Sports Guide. Plan you week with the help of our 10-day weather forecasts and weekend weather predictions for Moscow, Moskovskaya oblast', RU.

  21. Savvino-Storozhevsky Monastery and Museum

    Zvenigorod's most famous sight is the Savvino-Storozhevsky Monastery, which was founded in 1398 by the monk Savva from the Troitse-Sergieva Lavra, at the invitation and with the support of Prince Yury Dmitrievich of Zvenigorod. Savva was later canonised as St Sabbas (Savva) of Storozhev. The monastery late flourished under the reign of Tsar ...

  22. 2024 Mitsubishi Eclipse Cross Adaptive Cruise Control (and how to

    The refreshed Eclipse Cross by Mitsubishi is approaching its third model year in 2024. You might think that it's tired and no longer surprising customers. Bu...

  23. Gagarin Cup Preview: Atlant vs. Salavat Yulaev

    Much like the Elitserien Finals, we have a bit of an offense vs. defense match-up in this league Final. While Ufa let their star top line of Alexander Radulov, Patrick Thoresen and Igor Grigorenko loose on the KHL's Western Conference, Mytischi played a more conservative style, relying on veterans such as former NHLers Jan Bulis, Oleg Petrov, and Jaroslav Obsut.