viking long travel shocks

Log In to Your Account

Username or Email Address

Remember Me

• BATTERIES/CHARGERS
• ELECTRICAL/IGNTION
• EXHAUST/HEADERS
• HEADS/PORTING SERVICE
• INTAKES/THROTTLE BODY/CARBS
• SHOCKS/SPRINGS
• SUSPENSION/STEERING
• WHEELS/TIRES

Thomas Racing Service No Prep Extended Front 79-04 Mustang Struts (Viking)

$ 1,850.00

• Description
• Additional information

Upgrade those limited travel front struts and get yourself a pair of these bad boys! These extended struts give you a total of 9.25″ of travel in the front which make it the ultimate no prep strut. These are double adjustable crusaders which gives you 19 compression adjustments and 22 rebound adjustments.  There is no modifications needed to install these struts.

 PLEASE ALLOW 3-4 WEEKS FOR SHIPPING….ALSO THESE ARE SOLD AS A PAIR 

This Kit Includes:

-2 Front Viking Mustang Coilover Struts

******These shocks will come already assembled and will be ready for installation*******

1979-2004 Mustang

Related products

Innovative Racecraft F...

$ 949.98

AFCO Big Gun 1979-2004...

$ 1,996.00

Thomas Racing Service ...

$ 2,650.00

• Orders Over $200* Ship Free!
• Newsletter Signup

Viking Performance

Viking Performance Shocks are well known to be the best adjustable coil overs and rear adjustable shocks on the market. Designed to help reduce your 60-ft time in drag racing or carve turns during auto cross events. Viking warrior and premium crusader shocks set the standard. Viking double and triple adjustable shocks allow you to fine tune the rebound and compression specifically to your car for increased suspension control. Beefcake Racing is an Authorized Dealer, call 1-855-827-7223 for info and pricing. 

S550 Mustang

S650 mustang, s197 mustang, sn95 mustang, foxbody mustang.

*BCR Performance Inc. is not responsible for any price changes, mis-marked items or any other mis-printed items. By purchasing items from BCR Performance Inc, you are agreeing to all sections of our Disclaimer.

** BCR Performance Inc. doesn’t ship non-CARB legal products to California. For help with finding a CARB exempt product, please call (855-TBR-RACE) to speak with a Product Specialist. Please see our (Carb Exempt Page) for full California shipping information.

Viking Performance

Viking specializes in rod ends, spherical bearings, shock absorbers, and springs for high performance applications.

Showing 1–24 of 45 results

Front Coil Overs GM A Body

Long Travel Front Coil Overs

Viking Double Adjustable Front Shocks

Viking Double Adjustable Rear Shocks

Viking 82-02 F-Body Double Adjustable Rear Shock B223

Viking A Body Double Adjustable Rear Coil Over Crusader or Warrior

Viking Coil Over Springs

Viking Coil Overs Crusader or Warrior

Viking double adjustable front shock b212 b312 crusader or warrior, viking double adjustable front shock crusader or warrior.

Viking Double Adjustable Rear Coil Over Crusader or Warrior

Viking Double Adjustable REAR Shock B222 B322 B220 B320 Crusader or Warrior

Viking Double Adjustable Rear Shock B230 B330AM Crusader or Warrior

Viking double adjustable rear shock b260 b360am b230 b330am crusader or warrior, viking double adjustable rear shock b260 b360am b230 b330am crusader or warrior.

Viking Double Adjustable Universal Coil Over C209

• Forum Listing
• Marketplace
• Advanced Search
• Yamaha Viking Tech Talk & Accessories

Long travel suspension

• Add to quote

A lot if guys on here are talking about shocks and wanting a longer travel setup. I wonder if the wolverine shocks would fit the viking? They've got over an inch more travel in front and two inches in the rear. Plus they have a 5 way adjustable preload. The viking only weighs about 50 pounds more than the wolverine so I think they would hold the weight about the same.  

Never mind. Found another thread about this. My bad  

Fronts will work but the rears are like 3" too long. Ryan0 is looking at them for us Sent from The Green Machine  

• ?            
• 87.6K posts
• 5.2K members

Top Contributors this Month

• Timing Components
• Valve Springs
• Chassis & Suspension
• Fan & Radiator Components
• Silicone Hose Kits
• ECM & Tuning
• AFM/DOD & VVT Delete Kits
• Engine Mounts
• Harmonic Balancers
• Exhaust Systems
• Head Bolts & Head Studs
• Fuel Injectors
• Fuel Pressure Regulators
• Cold Air Intakes & Filters
• Intake Manifolds
• Throttle Bodies
• LS/LT Swap Components
• Nitrous Systems
• Turbochargers
• Clutch & Flywheel
• Clutch Hydraulics
• Differentials & Gears
• Torque Converters
• Transmission Cooling
• Tune-up & Maintenance
• OE-Style Wheels
• Race Star Wheels
• Apparel & Merchandise
• All Products
• Garage Sale/Open Box
• Camaro (1998-2002)
• Camaro (2010-2015)
• Camaro (2016+)
• Corvette C5 (1997-2004)
• Corvette C6 (2005-2013)
• Corvette C7 (2014+)
• CTS-V (2009-2015)
• GM Truck (1999-2007)
• GM Truck (2007-2013)
• GM Truck (2014+)
• GTO (2004-2006)
• TBSS (2006-2009)
• DOD Delete Form
• Request to Add a Part
• Check Order Status
• Return & Exchange Request
• LSx/LTx Performance Brands

Viking Warrior Double Adjustable Shock - w/ Eyelet Mounts

Price 5px padding, price rgba(59,59,97,0.4) color ---.

🚚 FREE SHIPPING*

PRODUCT DETAILS

Viking Performance Warrior double adjustable shocks offering independent adjustment of compression and rebound.

Warrior shocks offer 19 positions of adjustment for each compression and rebound, resulting in a total of 361 potential valving combinations. This allows the user to adjust valving for a number of scenarios from comfortable street driving, to high performance race use, and everything in between.

These shocks feature eyelet style mounts at both ends as pictured. Price listed is for one shock.

Poly mounts are 1.25" wide and feature a 3/4" ID (includes 1/2" and 5/8" ID sleeves), standard bearing mounts are 1" wide and feature a 1/2" ID, wide bearings are 1.25" wide and feature a 5/8" ID (includes 1/2" ID sleeves).

Shock length is the distance between the two mounting points of the shock, which is measured at ride height with the vehicle on the ground (suspension loaded).

• Lightweight aluminum twin-tube design with a sleek clear anodized finish
• Adjustment knobs labeled C for compression and R for rebound
• Maximized shock stroke for each shock body length, ensuring the most travel out of your shock or strut
• Aluminum, precision machined piston with a deflective disc and P.T.F.E/bronze piston seal
• Three step sealing system
• Each shock is tested and serialized
• Two year materials and workmanship warranty through Viking Performance
• Made in the U.S.A.

*Item ships directly from vendor.

ATTENTION: Due to demand and production time, please allow 4-5 weeks for ALL orders to ship.

• Newest Products

• Fitment Guide
• 1965-1967 Buick Gran Sport
• 1964-1967 Buick Skylark/Special/Sportwagon
• 1964-1967 Chevrolet Chevelle/El Camino/Malibu
• 1964-1967 Oldsmobile 442/Cutlass/F85/Vista Cruiser
• 1964-1967 Pontiac GTO/Lemans/Tempest

BUMP STEER KITS

Chassis reinforcement, chassis repair, coilover kits- front, coilover kits- rear, drive shaft loops, drop spindles, handling kits, hardware kits, heater box delete, rear control arms, springs & shock kits, springs & spring spacers, tie rod adjusters, 1968-1972 gm a-body.

• 1968-1972 Buick GS/GS 350/GS 400/GS 455/Special/Skylark/Sportwagon
• 1968-1972 Chevrolet Chevelle/El Camino/Monte Carlo
• 1971-1972 GMC Sprint
• 1968-1972 Oldsmobile 442/Cutlass/F85/Vista Cruiser
• 1968-1972 Pontiac Grand Prix/GTO/Lemans/Tempest

SPRING & SHOCK KITS

1973-1977 gm a-body.

• 1973-1977 Buick Century/Regal
• 1973-1977 Chevrolet Chevelle/El Camino/Laguna/Malibu/Monte Carlo
• 1973-1977 Oldsmobile Cutlass/F85
• 1973-1977 Pontiac Grand Am

REAR CONTROL ARM KITS

Rear lower control arms, rear upper control arms, 1959-1964 gm b-body.

• 1959-1964 Chevrolet Bel Air/Biscayne/Impala

PANHARD BARS

Rear suspension, rear suspension kits, 1965-1970 gm b-body.

• 1965-1970 Chevrolet Bel Air/Biscayne/Caprice/Impala

• 1978-1985 Buick LeSabre
• 1991-1996 Buick Roadmaster
• 1978-1996 Chevrolet Caprice
• 1994-1996 Chevrolet Impala SS
• 1977-1981 Pontiac Bonneville/Catalina

COIL-OVER KITS

CONTROL ARM RELOCATION

EXTENDED LENGTH CONTROL ARMS

1967-1969 GM F-BODY

• 1967-1969 Chevrolet Camaro
• 1967-1969 Pontiac Firebird

• 1970-1981 Chevrolet Camaro
• 1970-1981 Pontiac Firebird

A/C DELETE PANEL

Body mounts, chassis reinforcements, coil-over kits- front, engine mounts, extended coilover, front suspension kits, leaf springs, lowering springs, traction bars, transmission crossmembers.

• 1982-1992 Chevrolet Camaro
• 1982-1992 Pontiac Firebird

PANHARD LOWERING & RELOCATION

Caster & camber plates, front struts, lca & phb packages, shocks & springs, subframe connectors, torque arms, torque arm relocation, weight jacks.

• 1993-2002 Chevrolet Camaro
• 1993-2002 Pontiac Firebird

C5 BRAKE CONVERSION

Front suspension, hvac delete panel, shock tower braces, short shifters.

• 1978-1987 Buick Regal
• 1978-1987 Chevrolet El Camino
• 1978-1983 Chevrolet Malibu
• 1978-1988 Chevrolet Monte Carlo
• 1978-1987 GMC Caballero
• 1978-1988 Oldsmobile Cutlass
• 1982-1986 Pontiac Bonneville
• 1978-1987 Pontiac Grand Prix

AC/HEATER DELETE PANELS

Drive shaft loop, frame notching, front end kits, lowering spring/shock kits, relocation brackets, 1970-1981 gm h-body.

• 1975-1980 Buick Skyhawk
• 1971-1977 Chevrolet Vega
• 1975-1980 Chevrolet Monza/Starfire
• 1975-1980 Oldsmobile Starfire
• 1975-1977 Pontiac Astre
• 1976-1980 Pontiac Sunbird

CONTROL ARM PACKAGES

• 1963-1972 Chevrolet C10 RWD
• 1963-1972 GMC C15/C1500/R1500 RWD

• 1973-1987 Chevrolet C10 RWD
• 1973-1987 GMC C15/C1500/R1500 RWD

CHASSIS COMPONENTS

HANDLING/ LOWERING KITS

1982-2003 S10/S15

• 1982-2003 Chevrolet S10 2WD
• 1983-1994 Chevrolet S10 Blazer 2WD
• 1982-1990 GMC S15 2WD
• 1983-1991 GMC S15 Jimmy 2WD
• 1991-2003 GMC Sonoma 2WD

FRONT COILOVERS

2008-2014 camaro/g8.

• 2008-2009 Pontiac G8
• 2010-2014 Chevrolet Camaro

REAR TOE RODS

Rear trailing arms, tunnel brace, 2005-2014 ford mustang.

• 2005-2014 Ford Mustang

REAR CONTROL ARM RELOCATION BRACKETS

Strut tower braces, suspension packages, sway bar end links, traction packages, 1979-2004 ford mustang.

• 1979-2003 Ford Mustang

REAR CONTROL ARM REINFORCEMENTS

Rear end housing bushings, rear lift bars, shifter handles, shocks & struts, strip grip kits, 1997-2005 gm w-body.

• 1997-2005 Buick Intrigue/Regal
• 2000-2005 Chevrolet Impala/Monte Carlo
• 1998-2002 Oldsmobile Intrigue
• 1997-2005 Pontiac Grand Prix

1962-1979 GM X-BODY

• Buick Apollo/Skylark
• Chevrolet Chevy II/Nova
• GMC Arcadian
• Oldsmobile Omega
• Pontiac Phoenix/Ventura
• 2004-2007 Cadillac CTS-V
• Replacement Parts
• Merchandise
• GM Classics
• GM Mid Models
• GM Late Models
• Ford Mustang

• A-Arms Popular
• Bump Steer Kits
• Chassis Reinforcement Popular
• Chassis Repair
• Coil-Over Kits
• Drive Shaft Loop
• Drop Spindles
• Handling Kits Popular
• Hardware Kits
• Heater Box Delete
• Rear Control Arms Popular
• Springs & Shock Kit
• Springs & Spring Spacers
• Tie Rod Adjusters

• Springs & Shock Kits

• Coil-Over Kits - Front Popular
• Rear Control Arm Kits
• Rear Lower Control Arms Popular
• Rear Upper Control Arms

• Panhard Bars
• Rear Suspension
• Rear Suspension Kits

• A-Arms Hot Seller
• A/C Heater Delete
• C5 Brake Conversion
• Chassis Reinforcement Hot Sellers
• Engine Mounts New!
• Frame Notching Popular
• Front End Kits
• Handling Kits
• Lowering Springs/Shock Kits Popular
• Rear Control Arms
• Relocation Brackets

• A-Arms New!
• Coil-Over Kits New!
• Control Arm Relocation
• Extended Control Arms New!
• Sway Bars New!

• Body Mounts
• Chassis Reinforcements Popular
• Coil-Over Kits - Front
• Engine Mounts
• Extended Coilover
• Front Suspension Kits
• Leaf Springs
• Lowering Springs
• Traction Bars
• Transmission Crossmembers

• Caster & Camber Plates
• Coil-Over Kits - Rear
• LCA & PHB Packages
• Panhard Lowering & Relocation
• Shocks & Springs
• Steering Braces
• Strut Tower Braces
• Subframe Connectors
• Torque Arms
• Torque Arm Relocation
• Weight Jacks
• 1971-1980 H-Body
• Control Arm Packages
• Rear Lower Control Arms

• Front Suspension
• HVAC Delete
• Shock Tower Braces
• Short Shifter

• Rear Toe Rods
• Rear Trailing Arms
• Tunnel Brace

• Front Suspension New!
• Tie Rod Adjusters New!

• Chassis Components New!
• Handling/Lowering Kits New!

• Control Arm Reinforcements
• Rear-End Housing Bushings
• Rear Lift Bars
• Shifter Handles
• Shocks & Struts
• Strip Grip Kits

• Control Arm Relocation Brackets
• Suspension Packages
• Sway Bar End Links
• Traction Packages

GREASE & LUBRICANTS

Sway bar mounts, thrust bearings & spanner wrenches, ball joints, polyurethane ends, roto-joints, sleeves & aluminum bushings, sway bar parts, torque arm parts, sweatshirts.

• Corner Max Kits
• Power Tour Package
• News/Articles
• Privacy Policy
• Terms and Conditions

Your Name (required)

Your Email (required)

Your Message

1982-1992 GM F-Body Viking Front Coilover Kit, Berserker Double Adj.

$ 1,170.00 – $ 1,180.00

Description

Additional information.

• Shipping & Returns

Viking’s double adjustable front coilover kit for 3rd generation Camaro and Firebird provides ride height adjustability, in addition to compression and rebound adjustability, all in one convenient package. The shocks feature 19 independently adjustable compression and rebound settings for a total of 361 possible valving combinations. The 2-1/2” diameter springs are available in a wide variety of rates from light drag race to extra heavy auto-x and road race. They are a direct bolt-on and can dramatically increase the performance of your car in a variety of situations. No tools required to optimize damping for street, strip, auto-x or road race. – simply click the adjusters by hand. Viking’s coilover kit also includes an innovative upper mount to incorporate a thrust bearing which contributes to a smooth steering feel. When changing to a coilover on the 3rd generation F-body platform steering feel can be impacted but Vikings innovative design corrects this. Ride height is adjusted via spanner wrench and requires a few minutes per side. Thrust washers and spanner wrench highly recommended. Coilover kit must be used with UMI caster and camber plates P/N 2040. Does not work with factory camber plates.

Key Features:      

• Direct bolt on replacement for your vehicle.
• 19 way adjustable compression and rebound damping allows tuning for strip, street or handling (361 possible combinations)
• Every shock is built, dyno tested and serialized in Lakeville, Minnesota
• Shocks can be rebuilt at Viking or an authorized Viking rebuild center (call for details)
• Standard 2-1/2” ID spring with a wide variety of spring rates available.
• Springs are lightweight, high quality, Made In USA.
• Designed to be used with UMI caster and camber plates, P/N 2040.

Kit Includes:

• Two Front coilover struts, double adjustable.
• Two Front springs with choice of spring rate.
• Coilover hardware.

Spanner Wrench & Thrust Bearing Kit (Optional but recommended): Spanner wrench tool is used to adjust vehicle height while shock stays mounted. The thrust bearing kit is designed to be placed between the spring and the spring seat attached to the shock. This makes for easier adjustments since the spring seat is rotating on a bearing causing less friction. Thrust bearings are highly recommended for easier adjustments. We do not recommend adjusting without a thrust bearing kit.

Tire Width Note: For wheel and tire selection data, UMI tested the Viking strut on our 1989 IROC Camaro. With a factory 245/50-16 tire and wheel combination (factory style tire and GM factory wheel and wheel offset) there was 1/2″ of clearance between the spring and the tire. Coilover will clear with factory tire and wheel combinations.

Application Note: These Viking struts are indicated for drag race use by default. Minor spindle grinding.  UMI Swaybar 2117 works with these Viking struts.

Shipping Guidelines

Flat Rate Shipping ($11.99) is only offered on Retail orders over $149 shipped via Ground in the Continental United States.

All International customers are responsible for any applicable duties and/or taxes incurred on your shipment upon delivery.

Return Information

All returns are subject to the authorization of UMI Performance, Inc. Please email  [email protected]  for a Returned Merchandise Authorization (RMA) number. Our Sales team will either authorize or deny the request for return at its discretion. Any product returned without an issued RMA number will not be credited. All returns must be made within 30 days of delivery, be in new condition, be in original sealed packaging and include the RMA number on the outside of the packaging. No exceptions. All products and their packaging must be in new and unopened condition. Products that have been altered, installed, or modified are not returnable. All shipping costs for returns are the responsibility of the customer. All returns are subject to a 20% restocking fee as well as the original shipping charges that UMI Performance may have incurred while shipping your order.

Due to the majority of Viking products being drop shipped, we can not offer returns on any Viking products. If you purchase a Viking product be sure it fits your application. If you need technical assistance prior to placing order please contact  [email protected]

Related products

1982-1992 GM F-Body Spherical Caster/Camber Plates

1982-2002 GM F-Body Rear Coilover Brackets, Bolt In

Billet Tie Rod Adjusting Sleeves

1982-1992 GM F-Body Tunnel Mounted Torque Arm- Fits TH350 & T5 Transmissions

1982-1992 GM F-Body Tubular K-Member for LSX Engines, Weight Jacks – Road Race

Rear Spring Spacer, 1/8”, 67-72 GM A-Body, 78-88 GM G-Body, 82-02 GM F-Body, Sold Each

Rear Spring Spacer, 3/16”, 67-72 GM A-Body, 78-88 GM G-Body, 82-02 GM F-Body, Sold Each

Rear Spring Spacers, 67-72 GM A-Body, 78-88 GM G-Body, 82-02 GM F-Body, Kit

• 1964-1967 GM A-Body
• 1968-1972 GM A-Body
• 1973-1977 GM A-Body
• 1959-1964 GM B-Body
• 1965-1970 GM B-Body
• 1967-1969 GM F-Body
• 1962-1979 GM X-Body
• 1978-1996 GM B-Body
• 1978-1988 GM G-Body
• 1970-1981 GM F-Body
• 1982-1992 GM F-Body
• 2008-2014 Camaro/G8
• 1993-2002 GM F-Body
• 1997-2005 GM W-Body
• 1973-1987 GM C10/C15
• 1982-2003 S-10/S-15
• 1979-2004 Ford Mustang
• Sweatshirts
• Login / Register

Username or email address  *

Password  *

Lost your password? Remember me

No account yet?

We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.

Shopping Cart:

Yamaha Viking

Yamaha wolverine.

Shop by Category

Yamaha YXZ Accessories

• Yamaha Viking Accessories

Yamaha Wolverine Accessories

Long Travel Kits

Standard bracket lifts for the Yamaha Viking are great, but they do have drawbacks that can prove detrimental in some circumstances. And although portal gear lifts are extremely rugged and reliable, they too aren’t perfect for all applications. So if you’re wanting more ground clearance, a wider stance, and a ride that’s smoother than a Cadillac, a Yamaha Viking long travel kit could be right for you! At Everything Yamaha Offroad, we carry all sorts of long travel systems for the Yamaha Viking, the Viking VI, and the Viking 700. Our selection includes Yamaha Viking long travel axles, Yamaha Viking long travel a-arms, and even complete Yamaha Viking long travel kits by companies like Cognito, SuperATV, and HCR Racing. Unlike some long travel products out there, the ones we sell don’t produce excessive amounts of negative camber – which is hard on wheel bearings. And when paired with long travel shocks, our Yamaha Viking long travel kits allow for ultimate adjustability, enabling users to go from one terrain type to another while still maintaining the level of plushness to which they’ve grown accustomed!

Some lifts and aftermarket suspension setups for the Yamaha Viking are designed for slow crawling, while others are geared more towards fast-pace racing environments. Yamaha Viking long travel systems, however, can handle it all. The articulation they provide is super helpful when rock crawling. And when you encounter bumpy roads, ruts, and whoops, you’ll be able to eat them up with ease without even tapping the brakes so long as you’ve got a long travel kit installed! No matter what kind of riding you do, you’re sure to benefit from a Yamaha Viking long travel kit from Everything Yamaha Offroad!

1982-1992 Camaro/Firebird Viking Front Coilover Kit, Double Adjustable

Write a review.

• Create New Wish List

Product Description:

Viking's double adjustable front coil-over kit for 3rd generation Camaro and Firebird provides ride height adjustability, in addition to compression and rebound adjustability, all in one convenient package. The shocks feature 19 independently adjustable compression and rebound settings for a total of 361 possible valving combinations. The 2-1/2” diameter springs are available in a wide variety of rates from light drag race to extra heavy auto-x and road race. They are a direct bolt-on and can dramatically increase the performance of your car in a variety of situations. No tools required to optimize damping for street, strip, auto-x or road race. - simply click the adjusters by hand. Viking’s coil-over kit also includes an innovative upper mount to incorporate a thrust bearing which contributes to a smooth steering feel. When changing to a coil-over on the 3rd generation F-body platform steering feel can be impacted but Vikings innovative design corrects this. Ride height is adjusted via spanner wrench and requires a few minutes per side. Thrust washers and spanner wrench highly recommended. Coil-over kit must be used with UMI caster and camber plates P/N 2040. Does not work with factory camber plates.

Key Features:      

• This kit is designed for standard ride height vehicles, 0"-1.5"
• Direct bolt on replacement for your vehicle.
• 19 way adjustable compression and rebound damping allows tuning for strip, street or handling (361 possible combinations)
• Every shock is built, dyno tested and serialized in Lakeville, Minnesota
• Shocks can be rebuilt at Viking or an authorized Viking rebuild center (call for details)
• Standard 2-1/2” ID spring with a wide variety of spring rates available.
• Springs are lightweight, high quality, Made In USA.
• Designed to be used with UMI caster and camber plates, P/N 2040 .

Kit Includes:

• Two Front coil-over struts, double adjustable.
• Two Front springs with choice of spring rate.
• Coil-over hardware.

Spanner Wrench & Thrust Bearing Kit (Optional but recommended): Spanner wrench tool is used to adjust vehicle height while shock stays mounted. The thrust bearing kit is designed to be placed between the spring and the spring seat attached to the shock. This makes for easier adjustments since the spring seat is rotating on a bearing causing less friction. Thrust bearings are highly recommended for easier adjustments. We do not recommend adjusting without a thrust bearing kit.

Tire Width Note: For wheel and tire selection data, UMI tested the Viking strut on our 1989 IROC Camaro. With a factory 245/50-16 tire and wheel combination (factory style tire and GM factory wheel and wheel offset) there was 1/2" of clearance between the spring and the tire. Coil-over will clear with factory tire and wheel combinations.

Application Note: These Viking struts are indicated for drag race use by default. Minor spindle grinding and sway bar delete is required. Contact UMI Technician if interested in using with sway bar for road race application.

Related Products

1993-2002 Camaro / Firebird Front Coil Over Kit, Double Adjustable, Viking Performance

1982-1992 Camaro/Firebird Front Lower A-arms, Poly Bushings, Coilover Specific, UMI Performance

1982-1992 Camaro/Firebird Front Lower A-arms, Delrin Bushings, Coilover Specific, UMI Performance

1982-1992 Camaro/Firebird Front CoolRide, Ridetech

1993-2002 Camaro / Firebird Front Coil Over Kit, Double Adjustable Bearing, Viking

Shop by brand.

Best Sellers

82-92 Camaro/Firebird Door Panel Push Pin Clips, Package of 10

82-2002 Camaro / Firebird Black Wheel Lug Nut Plastic Cap, Lug Nut Caps Set of 5

1982-1992 Camaro/Firebird Interior Rear Hatch Screw Nut Retainer, Reproduction, Qty. 10

93-02 Camaro/Firebird Hood Adjust Bumper Stop, Outer Side, GM OEM

82-2002 Camaro/Firebird Interior Screw, New GM, with washer head, Pack of 10

Join the hawks motorsports newsletter for updates, offers & promotions, sign up for updates.

Join our email list to receive updates and exclusive offers directly in your inbox

*By completing this form you are signing up to receive our emails. You can unsubscribe at any time.

Copyright © 2024 Hawks Third Generation.

Powered by BigCommerce . Designed by Frooition

Viking Performance Shocks – In-depth Expert Review

All things considered, Viking performance shocks suspension system ensures a comfortable and secure ride for the driver and passengers. The suspension system maintains the vehicle’s stability during cornering, braking, and accelerating, which also absorbs shock and vibration brought on by abnormalities in the road.

The shock absorber, which controls how much the spring oscillations are dampened and how long the wheels remain in touch with the road, is an essential component of the suspension system.

Viking Performance Shocks is a prominent manufacturer of high-performance shock absorbers for various vehicles, including automobiles, trucks, sport utility vehicles, and racing cars.

With over a decade of experience, Viking shocks has established a reputation for manufacturing high-quality, dependable shocks that can withstand difficult driving situations.

In this piece, we will examine Viking shock absorbers in-depth and explain why they are the ideal choice for your car’s suspension system.

Better Control and Stability

Improved comfort with viking performance shocks, enhanced durability, customizable, improved control, enhancing performance, double adjustable viking performance shocks, single adjustable shocks, crusader series shocks, warrior series viking performance shocks, smooth body shocks, coilover shocks, big body shocks, identify your driving requirements, take into account the suspension system and weight of your car, choose the degree of adjustability you want, select the appropriate size and mounting arrangement, speak with a specialist, installation, maintenance of viking performance shocks, viking performance shocks’ advantages.

Viking Performance Shocks is a leading high-performance shock absorbers producer, providing car owners with several advantages. The following are a few of the main advantages of Viking shocks.

Read More: RANCHO RS5000X VS BILSTEIN 4600 – WHICH IS BETTER?

The capacity of Viking Performance Shocks to enhance handling and stability is one of their most important advantages.

You can corner more quickly and confidently with Viking absorbers because they reduce body roll and boost traction. They can also increase the stability of your car at high speeds, giving you a smoother, more controlled ride.

Read More: WORKS PERFORMANCE SHOCKS – IN-DEPTH EXPERT REVIEW

Increased comfort is one of Viking Performance Shocks’ main advantages. These shock absorbers make the ride smoother and more comfortable by minimizing the amount of vibration and harshness communicated to the cabin.

This can prevent weariness and enhance your and your passengers’ enjoyment of long rides. 

Read More: WHAT ARE THE BEST SHOCKS, OTHER THAN BILSTEIN?

Viking shocks are made to survive arduous driving conditions and last a long time. They are constructed from top-notch materials engineered to withstand deterioration and provide dependable performance over an extended period.

You can rely on your Viking shocks to perform constantly, even in difficult driving circumstances.

Read More: WHERE ARE KYB SHOCKS MADE? THIS WILL SHOCK YOU!

The high degree of customizability of Viking Performance Shocks is another important advantage. You can select the ideal shocks for your unique demands from various types and configurations of these shock absorbers.

Viking shocks has a product to suit your demands, whether you need shocks for racing or off-roading.

Read More: 6112 BILSTEIN FOR TACOMA: EVERYTHING YOU NEED TO KNOW

All in all, Viking shocks give you more control over your car, which might enhance your driving experience.

These shock absorbers can help you better manage your car even in hazardous driving situations by lowering body roll and enhancing traction. By doing this, you can prevent collisions and enhance the safety and enjoyment of your driving.

Read More: WHAT IS THE LIFE EXPECTANCY OF OME SHOCKS?

Last but not least, Viking Performance Shocks can raise the overall efficiency of your car. These shock absorbers can improve your vehicle’s performance by minimizing the energy absorbed by the suspension system, leading to better acceleration, braking, and handling. This can lead to increased fuel economy and a better driving experience.

Owners of vehicles can benefit from Viking shocks’ higher comfort, increased durability, customizability, better control, and improved performance, among other advantages.

Viking shocks provides a product that will satisfy your needs and exceed your expectations, whether you’re searching for shocks for racing, off-roading, or regular driving.

Read More: 3RD GEN TACOMA BILSTEIN LIFT KIT – COMPLETE REVIEW

Viking Performance Shocks Types

To begin with, Viking Performance Shocks provides a large selection of shock absorbers to fulfill every driver’s needs. Viking shock absorbers come in various varieties, each with special characteristics and advantages. The various Viking shock absorbers offered include the following:

Compression and rebound damping can be precisely controlled using double adjustable shocks. They are perfect for racing situations where handling and performance are crucial.

With these shocks, you can fine-tune your suspension for optimum performance by adjusting the compression and rebound settings separately.

Read More: RANCHO RS7MT VS BILSTEIN 5100 – WHICH IS THE BEST?

Performance and comfort are intended to be balanced with single adjustable shocks. They allow you to change the rebound damping to improve control and handling while keeping the ride comfortable. These shocks are perfect for both racing and regular driving.

Read More: RANCHO RS5000X VS BILSTEIN 5100 – WHICH IS BETTER?

All things considered, the Crusader Series shocks are built for off-road use and rough terrain. These shocks have a remote reservoir and a big piston diameter for enhanced performance and durability.

The Crusader Series shocks are offered in single and double-adjustable variants to suit your unique requirements.

Read More: BELLTECH STREET PERFORMANCE SHOCKS: SPECIAL EXPERT REVIEW

The shocks are intended for use in drag racing. These shocks come in single and double-adjustable layouts and have a high-performance valving system. Shocks from the Warrior Series offer better grip and control for quicker acceleration times.

Read More: WHAT IS THE DIFFERENCE BETWEEN ATV AND UTV?

Smooth body shocks are made to give high-performance damping while maintaining a sleek, low-profile appearance. These shocks are perfect for street and track usage and come in single and double-adjustable variants.

Read More: WHAT IS THE DIFFERENCE BETWEEN SR5 AND TRD?

By and large, high-performance street and track applications call for coilover shocks. These shocks have a threaded body and a completely adjustable spring preload to enable fine suspension adjustment. Both single and double-adjustable coilover shock setups are offered.

Read More: WHICH IS BETTER, BILSTEIN 5100 OR 6112?

Big body shocks are intended for heavy-duty vehicles like trucks and SUVs. These shocks have a body and piston with a bigger diameter for better durability and performance. Both single and double-adjustable big-body shock variants are offered.

Viking Performance Shocks provides a large selection of shock absorbers to satisfy every driver’s needs. A Viking Performance Shock will provide you with the required performance and handling, whether you’re drag racing, going off-road, or driving about town.

No matter which type of shocks you select—double adjustable, single adjustable, Crusader, Warrior, smooth body, coilover, or big body—you can rely on Viking shock absorbers to meet your expectations for performance and dependability.

Read More: OLD MAN EMU SHOCKS: ARE THEY ACTUALLY GOOD?

How to Select the Best Viking Performance Shocks for Your Vehicle

There are various things to consider when selecting the best Viking performance shocks for your car. The following advice will help you select the ideal Viking shock absorbers for your car.

Read More: SUZUKI KING QUAD 750 PROBLEMS – THESE ARE EASY TO FIX

Indeed, determine your driving needs as the first step in selecting the best Viking performance shocks. Are you a daily driver, off-roader, or drag racer?

Selecting the appropriate performance shocks for your unique needs is crucial because different shocks are built for various driving circumstances.

Read More: SSR 125 TOP SPEED – EXPERT REVIEW AND FEATURES

Your choice of Viking shock absorbers may also be influenced by the weight of your vehicle and the kind of suspension system it has.

While vehicles with more sophisticated suspension systems may need more precisely tuned shocks to the individual suspension components, heavy vehicles may need larger-diameter shocks to handle the weight.

Read More: KAWASAKI KX85 TOP SPEED AND COMPLETE EXPERT REVIEW

Both single and double-adjustable variants of Viking Performance Shocks are offered. With single adjustable shocks, you can only change the rebound damping.

Without doubt, with double adjustable shocks, you can independently change the compression and rebound damping. When selecting your Viking shocks, consider the degree of adjustability you want.

Read More: WHY ARE JEEP ABS AND TRACTION CONTROL LIGHTS ON? EASY REASONS

Numerous sizes and mounting options are offered for Viking Performance Shocks. Ensure the shocks you select are the proper size for your vehicle and mounting points.

Read More: JEEP WRANGLER ENGINE REPLACEMENT – HOW MUCH WILL IT COST?

Without a doubt, consult a specialist if you’re unsure which Viking shock absorbers are best for your car. Moreover, a skilled mechanic or suspension expert can assist you in selecting the ideal shock absorbers for your unique requirements and offer installation instructions to guarantee appropriate fitment and performance.

Viking shocks must be carefully chosen for your vehicle based on your driving requirements, the weight and suspension system of the vehicle, the required level of adjustability, size, and mounting arrangement.

You can select the Viking Performance Shocks that will offer the performance, handling, and dependability you require for your particular driving application by weighing these aspects and, if necessary, seeking professional advice.

Read More: COST TO REPLACE JEEP WRANGLER KEY – EXPERT ADVICE?

How to Install and Maintain Viking Performance Shocks

Viking performance shocks’ optimum performance and endurance depend on proper installation and maintenance. The following are some pointers for setting up and caring for Viking shocks.

Read More: JEEP LIBERTY OVERHEATING PROBLEMS – HERE ARE 12 REASONS WHY

• Utilize the Correct Tools and Equipment:

Ensure you have all the required tools and equipment before installing your performance shocks. This includes any unique tools your car needs, such as a torque wrench, jack stands, and jack.

• Observe the Manufacturer’s Guidelines

Installation instructions for Viking shock absorbers are comprehensive. To guarantee optimum fit and function, strictly adhere to these directions.

• Look for any Wear or Damage

Check your Viking Performance Shocks for any signs of wear or damage before installing them. Before installing the shocks, replace any damaged ones.

• Torque as Required

The correct torque ensures your Viking shocks are installed properly. All bolts should be tightened according to the manufacturer’s instructions using a torque wrench.

Read More: JEEP DOORS WON’T COME OFF: CAUSES AND HOW TO FIX IT

• Examine for Leaks

In general, check your Viking shocks frequently for any indications of oil leaks. Most important, contact Viking Performance Shocks for support if you discover any leakage.

• Clean the Shocks

Your Viking shocks’ lifespan can be extended by routine cleaning. Avoid harsh chemicals that can harm the shock seals while cleaning the shocks; use mild soap and water.

• Adjust as Necessary

If your Viking shocks are programmable, check the settings regularly and make any required adjustments to maintain peak performance.

• Examine the Wear

Your Viking Performance Shocks could become worn out and must be replaced over time. Check the shocks frequently for wear indicators, such as damaged seals or worn bushings.

Viking shocks’ optimum performance and endurance depend on proper installation and maintenance.

When installing your shocks, carefully follow the manufacturer’s instructions and periodically check and maintain them to ensure they work properly.

In brief, your Viking shocks will deliver the performance, handling, and dependability required for your unique driving application with proper installation and maintenance.

Read More: ROOFTOP TENT FOR THE 4RUNNER – HERE ARE THE BEST

Anyone looking to enhance the performance and handling of their vehicle should consider Viking shocks. In addition, Viking Performance Shocks come in various styles and sizes, allowing you to adjust them to your car and driving preferences.

Viking Performance Shocks are built to resist the wear and tear of everyday use and provide greater performance and handling.

Finally, their top-notch construction and materials guarantee they can withstand the roughest road conditions and deliver dependable performance for years.

Read More: 3RD GEN TACOMA FLAT BED – EXPERT REVIEW AND ANALYSIS

Offroad Guidance

Wednesday 21st of June 2023

Shopping Cart:

Buy Now, Pay Later Starting at 0% APR

• MILITARY / 1ST RESPONDER DISCOUNT: CLICK HERE
• Gift Certificates
• Compare ( 0 )

Customer Login

If you are already registered, please log in.

Create your account and enjoy a new shopping experience.

Order Hotline

• Ford Vehicles
• 1979-1993 Mustang
• Shocks & Struts

Viking 79-04 Mustang Double Adjustable Shock B224 B244 (Street / Strip) EACH

have questions?

Proven Products

Race & Street Proven

In-House Experts

We're here to help

Easy Installation

Quick & Easy Install

Wordwide Delivery

We ship worldwide!

Viking Performance

Write a Review

• Create New Wish List

Frequently Bought Together

Back Orders:

Occasionally some parts that you have ordered will be out of stock. You will be called if any of the parts are out of stock and either hold the order till everything arrives or ship out what we have in stock and ship the remainder when it comes in based on your preference. You will not be charged for any items that are out of stock until the part is ready for shipping.

Canadian Orders:

UPR Products does ship to Canada via USPS. Customers will go through the normal checkout process and our system will estimate the cost of shipping automatically based on your address. Please note - Additional Duties, taxes & Import Fee's may be charged upon arrival.

International Orders:

UPR Products ships internationally but due to frequently changing freight costs it is quoted per order. International customers should include both a phone number and email with their order so you can be contacted with a shipping quote.

How Do I Return a Product:

If you need to return or exchange a product, please call us at 561-588-6630 within 30 days of receiving your order. We will issue a Return Merchandise Authorization (RMA) number which is required to process your return. Products should be shipped back to us via UPS, Fedex, USPS with a tracking number and insurance. All returned items must be in new condition and in the original packaging. Installed items cannot be returned. Contact us within the 30 days of receiving your order for any order issues. You are responsible for all return shipping charges and a 20% restocking fee will apply for any unapproved returns. Please check all parts for damage or defect when you receive your order and prior to installing or using the item.

Non-Returnable Products:

The following items will not be accepted as returns. Tuners and tuning devices, opened and or installed clutches (removed from original packing), non-defective items that have been installed, gift certificates, catch cans, fuel pumps, fuel injectors, nitrous kits, shocks, struts. Issues with any of the listed items must be taken up directly with the manufacturer.

Warranty Policy:

UPR Products offers a lifetime warranty against defects and failure on all products that we manufacture. Contact us at 561-588-6630 for further warranty information.

Magnaflow Warranty / Return Policy:

Magnaflow offers a Lifetime Warranty on their performance exhaust kits.

Magnaflow Warranty Details

Register your Magnaflow Exhaust

For a Magnaflow Warranty Return, complete the following form and contact UPR Products at 561-588-6630.

Magnaflow Warranty Return Form

Related Products

Viking 79-04 Mustang Double Adjustable Crusader Shock B324 (Race) EACH

79-04 mustang rear double adjustable coil over kit (street / strip).

Viking 05-14 Mustang Double Adjustable Shock B226 B246 (Street / Strip) Each

Viking Warrior Custom Coil Over Shocks Double Adjustable

79-04 Mustang Viking Double Adj Strut & Shock Package

Ask the upr experts, subscribe to our newsletter.

Get the latest updates on new products and upcoming sales

We promise to only send you good things

Competitive Suspension Long Travel Stock Mount Struts

We are excited to release our new 79-14 Mustang long travel strut. These struts offer 2″ more travel over the standard build. These are utilizing a new shaft that we have sourced along with a bleed style rebound adjuster for a range of adjustment in the areas that matter the most. The shaft is a precision machined chromoly shaft. These struts use a piston with a shim stack to allow for infinite valving combinations. All struts are dynoed and pre set at our facility. New struts along with 16″ springs, and Torrington bearings are priced a $2,500 for the pair.

We can update existing AFCO struts and give them 2″ more travel for $800. This service includes new shafts, along with a complete service, along with a pre and post dyno service.

Ron G Afterworks Shocks / Struts

Subscribe to be the first to hear about our exclusive offers and latest arrivals.

Customer care

Learn more about us

Featured collections

Get in touch.

• American Express
• © 2024, Hammer Concepts and Designs LLC
• Powered by Shopify
• Choosing a selection results in a full page refresh.